ISL54406_14 Datasheet, PDF (1/16 Pages) Intersil Corporation – Stereo Click and Pop Eliminator with Audio Muting

Stereo Click and Pop Eliminator with Audio Muting
ISL54406
The Intersil ISL54406 is a Dual SPST (Single Pole/Single
Throw) switch that provides a very low distortion audio
path for a stereo headphone or high impedance line-in
load. This path can be interrupted to provide >110dB of
off-isolation for signal muting purposes into 32Ω or high
impedance loads such as consumer entertainment
system line-inputs, MP3 docking systems for powered
speaker or automotive entertainment system in-line or
cassette interfaces. Recovery from muting is instant
even with very large DC blocking capacitors.
The ISL54406 also has comprehensive Click and Pop
elimination measures to prevent these artifacts from
occurring in the load due to system power-up/power-
down, codec enable/disable, headphone hot plug in,
and audio muting on/off situations. The Click and Pop
elimination is effective into low and high impedance
loads and requires no external timing components to
deal with DC blocking capacitors placed between the
single supply codec and the load.
The ISL54406 is available in a 10 Ld TDFN (3mmx3mm)
or a tiny 10 Ld µTQFN (1.8mmx1.4mm) ultra-thin
package. It operates over a temperature range of -40 to
+85°C.
Features
• Single Supply Operation (V_DD) . . . . +2.7V to +5.0V
• Negative Signal Swing Capability . . . . . . . . . . . -1.5V
• Low THD
- THD+N at 1mW into 32Ω Load. . . . . . . . . <0.02%
• Click and Pop Elimination . . . . . . . . . . . . . . . >60dB
• Audio Muting . . . . . . . . . . . . . . . . . . . . . . >110dB
• Low Power Consumption. . . . . . 21µW with 3V supply
• Low Power Shutdown Mode
• 1.8V Logic Compatible
• Available in 10 Ld TDFN (3mmx3mm) or tiny
10 Ld (1.8mmx1.4mm) µTQFN Package
• Pb-Free (RoHS Compliant)
Applications
• Consumer Entertainment Systems
• MP3 and other Personal Media Players
• Cellular/Mobile Phones
• PDA’s
• Audio Switching and Muting
Related Literature*(see page 14)
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”.
• Application Note AN1368 “ISL54406EVAL1Z
Evaluation Board User’s Manual”
Application Block Diagram
3.3V
0.1µF
V_DD
LOGIC
CONTROL
L_OUT
µCONTROLLER
SEL1
SEL2
L_IN
AUDIO
CODEC
R_OUT
CLICK AND POP
CIRCUITRY
R_IN
ISL54406
GND
July 14, 2010
FN6578.1
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2008, 2010. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.