ISL54230_09 Datasheet, PDF (1/18 Pages) Intersil Corporation – Octal Multiprotocol Switch

®
Data Sheet
May 28, 2009
ISL54230
FN6825.2
Octal Multiprotocol Switch
The Intersil ISL54230 is a multiprotocol Quad Double-Pole
Double-Throw (DPDT) analog switch that can operate from a
single +2.0V to +5.5V supply. It contains eight SPDT (Single
Pole/Double Throw) switches configured into four DPDT
blocks. Each DPDT block is independently controlled by a
logic input for Normally Open (NO) or Normally Closed (NC)
switch configuration.The part is designed for switching or
routing a combination of USB High-Speed, USB Full-Speed,
digital, and analog signals in portable battery powered
products.
The digital inputs are 1.8V logic compatible when operated
with a 2.7V to 3.6V supply. The ISL54230 has two switch
enable pins to disable certain blocks of the switch. The
ISL54230 is available in a 36 ball 2.5mmx2.5mm WLCSP or a
32 Ld TQFN 5mmx5mm package. It operates over a
temperature range of -40 to +85°C.
Applications
• Cellular/Mobile Phones
• PDAs
• Digital Cameras and Camcorders
• USB/UART/Audio Switching
Block Diagram
V_DD
1Ω
COM1A
IN1
COM1B
6Ω
COM2A
IN2
COM2B
HS_USB
HS_USB
COM3A
IN3
COM3B
HS_USB
HS_USB
COM4A
1Ω
IN4
COM4B
6Ω
OE1
OE2
NO1A
NC1A
NO1B
NC1B
NO2A
NC2A
NO2B
NC2B
NO3A
NC3A
NO3B
NC3B
NO4A
NC4A
NO4B
NC4B
GND
Features
• High Speed (480Mbps) and Full Speed (12Mbps)
Signaling Capability per USB 2.0
• Compliant with USB 2.0 Short Circuit and Overvoltage
Requirements Without Additional External Components
• 1.8V Logic Compatible (+2.7V to +3.6V Supply)
• Switch Terminals Overvoltage Protected Up to +5.5V
• Enable Pin to disable Switch Blocks
• Two DPDT 1Ω/6Ω Switches
• Two DPDT USB 2.0 FS/HS Capable Switches
• USB Switch Low ON Capacitance. . . . . . . . . . . . . . . 12pF
• USB Switch Low ON-Resistance. . . . . . . . . . . . . . . . . 6Ω
• Single Supply Operation (V_DD) . . . . . . . . . . +2.0V to +5.5V
• Low Power Consumption (P_D) . . . . . . . . . . . . . . . . . . 1µA
• Low I+ Current when V_INH is not at the V+ Rail
• Available in 36 Ball WLCSP and 32 Ld 5mmx5mm TQFN
Package
• Pb-Free (RoHS Compliant)
Ordering Information
TEMP.
PART RANGE
PART NUMBER MARKING (°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL54230IRTZ 54230 IRTZ -40 to +85 32 Ld 5x5 TQFN L32.5x5A
(Note 1)
ISL54230IRTZ-T* 54230 IRTZ -40 to +85 32 Ld 5x5 TQFN L32.5x5A
(Note 1)
ISL54230IIZ-T* 230Z
(Note 2)
-40 to +85 36 Ball 6x6 Array W6x6.36
WLCSP
*Please refer to TB347 for details on reel specifications.
NOTES:
1. These Intersil Pb-free plastic packaged products employ special Pb-
free material sets, molding compounds/die attach materials, and
100% matte tin plate plus anneal (e3 termination finish, which is
RoHS compliant and compatible with both SnPb and Pb-free
soldering operations). Intersil Pb-free products are MSL classified
at Pb-free peak reflow temperatures that meet or exceed the Pb-
free requirements of IPC/JEDEC J STD-020.
2. These Intersil Pb-free WLCSP and BGA packaged products
products employ special Pb-free material sets; molding
compounds/die attach materials and SnAgCu - e1 solder ball
terminals, which are RoHS compliant and compatible with both
SnPb and Pb-free soldering operations. Intersil Pb-free WLCSP
and BGA packaged products are MSL classified at Pb-free peak
reflow temperatures that meet or exceed the Pb-free requirements
of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2009. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.