ISL43143_05 Datasheet, PDF (1/15 Pages) Intersil Corporation – Low-Voltage, Single and Dual Supply, Quad SPST, High Performance Analog Switches

®
Data Sheet
ISL43143, ISL43144, ISL43145
December 1, 2005
FN6037.3
Low-Voltage, Single and Dual Supply,
Quad SPST, High Performance Analog
Switches
The Intersil ISL43143–ISL43145 devices are CMOS,
precision, quad SPST analog switches designed to operate
from a single +2V to +12V supply or from a ±2V to ±6V supply.
Targeted applications include battery powered equipment that
benefit from the devices’ low power consumption (<1µW), low
leakage currents (5nA max), and fast switching speeds
(t_ON = 52ns, t_OFF = 40ns). A 5Ω maximum R_ON flatness
ensures signal fidelity, while channel-to-channel mismatch is
guaranteed to be less than 2Ω.
The ISL43143/ISL43144/ISL43145 are quad single-pole/
single-throw (SPST) devices. The ISL43143 has four normally
closed (NC) switches; the ISL43144 has four normally open
(NO) switches; the ISL43145 has two NO and two NC
switches and can be used as a dual SPDT, or a dual 2:1
multiplexer.
Table 1 summarizes the performance of this family.
TABLE 1. FEATURES AT A GLANCE
ISL43143 ISL43144 ISL43145
Number of Switches
4
4
4
Configuration
All NC
All NO 2 NC/2 NO
±4.5V R_ON
±4.5V t_ON/t_OFF
10.8V R_ON
10.8V t_ON/t_OFF
4.5V R_ON
4.5V t_ON/t_OFF
3V R_ON
3V t_ON/t_OFF
Packages
18Ω
18Ω
18Ω
52ns/40ns 52ns/40ns 52ns/40ns
14Ω
14Ω
14Ω
40ns/27ns 40ns/27ns 40ns/27ns
30Ω
30Ω
30Ω
64ns/29ns 64ns/29ns 64ns/29ns
51Ω
51Ω
51Ω
120ns/50ns 120ns/50ns 120ns/50ns
16 Ld TSSOP, 16Ld QFN 4x4
Features
• Fully Specified for 10% Tolerances at V_S = ±5V and
V+ = 12V, 5V and 3.3V
• Four Separately Controlled SPST Switches
• Pin Compatible with DG411/DG412/DG413
• ON Resistance (R_ON Max.) . . . . . . . . . . . . . . . . . . . . 25Ω
• R_ON Matching Between Channels. . . . . . . . . . . . . . . . . . <1Ω
• Low Power Consumption (P_D) . . . . . . . . . . . . . . . . . . . .<1µW
• Low Off Leakage Current (Max at 85°C) . . . . . . . . . 2.5nA
• Fast Switching Action
- t_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52ns
- t_OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
• Minimum 2000V ESD Protection per Method 3015.7
• TTL, CMOS Compatible
• Pb-Free Plus Anneal Available (RoHS Compliant)
Applications
• Battery Powered, Handheld, and Portable Equipment
- Barcode Scanners
- Laptops, Notebooks, Palmtops
• Communications Systems
- Radios
- XDSL and PBX / PABX
- RF “Tee” Switches
- Base Stations
• Test Equipment
- Medical Ultrasound
- Electrocardiograph
- ATE
• Audio and Video Switching
• General Purpose Circuits
- +3V/+5V DACs and ADCs
- Digital Filters
- Operational Amplifier Gain Switching Networks
- High Frequency Analog Switching
- High Speed Multiplexing
Related Literature
• Technical Brief TB363 “Guidelines for Handling and
Processing Moisture Sensitive Surface Mount Devices
(SMDs)”
• AN557 “Recommended Test Procedures for Analog
Switches”
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003-2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.