ISL29011_14 Datasheet, PDF (1/19 Pages) Intersil Corporation – Digital Ambient Light Sensor and Proximity Sensor with Interrupt Function

Digital Ambient Light Sensor and Proximity Sensor with
Interrupt Function
ISL29011
The ISL29011 is an integrated ambient and infrared
light-to-digital converter with a built-in IR LED driver and I²C
Interface (SMBus Compatible). This device provides not only
ambient light sensing to allow robust backlight/display brightness
control but also infrared sensing to allow proximity estimation
featured with interrupt function.
For ambient light sensing, an internal ADC has been designed
based on the charge-balancing A/D conversion technique. The
ADC conversion time is nominally 90ms and is user adjustable
from 11µs to 90ms, depending on oscillator frequency and ADC
resolution. This ADC is capable of rejecting 50Hz and 60Hz flicker
noise caused by artificial light sources. The lux-range-select
feature allows users to program the lux range for optimized
counts/lux.
For proximity sensing, the ADC is used to digitize the output signal
from the photodiode array when the internal IR LED driver is
turned on and off for the programmed time periods under
user-selected modulation frequency to drive the external IR LED.
As this proximity sensor employs a noise cancellation scheme to
highly reject unwanted IR noise, the digital output of proximity
sensing decreases with distance. The driver output current is user
selectable up to 100mA to drive different types of IR emitter
LEDs.
Six different modes of operation can be selected via the I²C
interface: Programmable ALS once with auto power-down,
programmable IR sensing once, programmable proximity sensing
once, programmable continuous ALS sensing, programmable
continuous IR sensing and programmable continuous proximity
sensing. The programmable one-time operation modes greatly
reduce power because an immediate automatic shutdown
reduces overall supply current less than 0.5µA.
The ISL29011 supports both hardware and software interrupts
that remain asserted until the host clears it through the I²C
interface for ambient light sensing and proximity detection.
Designed to operate on supplies from 2.25V to 3.63V, the
ISL29011 is specified for operation over the -40°C to +85°C
ambient temperature range. It is packaged in a clear, Pb-free 8 Ld
ODFN package.
Applications
• Display and keypad dimming adjustment and proximity
sensing for:
- Mobile devices: smart phone, PDA, GPS
- Computing devices: Notebook PC, Webpad
- Consumer devices: LCD-TV, digital picture frame, digital
camera
• Industrial and medical light and proximity sensing
Features
Proximity Sensing
• Ambient IR cancellation during proximity sensing
- Works under direct sunlight
• IR LED driver with programmable source current
- Adjustable current drive from 100mA to 12.5mA
• Programmable LED current modulation frequency
• Variable conversion resolution
Ambient Light Sensing
• Simple output code directly proportional to lux
• Adjustable sensitivity up to 65 counts per lux
• Selectable range (via I²C)
- Range 1 = 0.015 lux to 1,000 lux
- Range 2 = 0.06 lux to 4,000 lux
- Range 3 = 0.24 lux to 16,000 lux
- Range 4 = 0.96 lux to 64,000 lux
• Integrated 50Hz/60Hz noise rejection
• Works under various light sources, including sunlight
Ideal Spectral Response for Light and Proximity Sensor
• Light sensor close to human eye response
- Excellent light sensor IR and UV rejection
• Proximity sensor range from 850nm to 950nm
- Can use either 850nm or 950nm LED solution
Ultra Low Power
• 90µA max operating current
• Software shutdown and automatic shutdown
- 0.5µA max shutdown current
Easy to Use
• I²C (SMBus compatible) output
• No complex algorithms needed
• Temperature compensated
• Small form factor
- 8 Ld 2.0mmx2.1mmx0.7mm ODFN package
Additional Features
• I²C and SMBus compatible
• 1.7V to 3.63V supply for I²C interface
• 2.25V to 3.63V sensor power supply
• Pb-Free (RoHS compliant)
May 1, 2014
FN6467.6
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2009-2012, 2014. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.