ISL28278_07 Datasheet, PDF (1/13 Pages) Intersil Corporation – Dual and Quad Micropower Single Supply Rail-to-Rail Input and Output (RRIO) Op-Amp

®
Data Sheet
ISL28278, ISL28478
July 11, 2007
FN6145.2
Dual and Quad Micropower Single Supply
Rail-to-Rail Input and Output (RRIO)
Op-Amp
The ISL28278 and ISL28478 are dual and quad channel
micropower operational amplifiers optimized for single
supply operation over the 2.4V to 5V range. They can be
operated from one lithium cell or two Ni-Cd batteries. For
equivalent performance in a single channel op-amp
reference EL8178.
These devices feature an Input Range Enhancement Circuit
(IREC) which enables them to maintain CMRR performance
for input voltages 10% above the positive supply rail and to
100mV below the negative supply. The output operation is
rail to rail.
The ISL28278 and ISL28478 draw minimal supply current
while meeting excellent DC-accuracy, AC-performance,
noise and output drive specifications. The ISL28278
contains a power down enable pin that reduces the power
supply current to typically 4µA in the disabled state.
Pinouts
ISL28278 (16 LD QSOP)
TOP VIEW
NC 1
16 NC
NC 2
15 V+
OUT_A 3
14 OUT_B
IN-_A 4
13 IN-_B
IN+_A 5
12 IN+_B
EN_A 6
11 EN_B
V- 7
10 NC
NC 8
9 NC
ISL28478 (16 LD QSOP)
TOP VIEW
OUT_A 1
IN-_A 2
IN+_A 3
V+ 4
IN+_B 5
IN-_B 6
OUT_B 7
NC 8
16 OUT_D
15 IN-_D
14 IN+_D
13 V-
12 IN+_C
11 IN-_C
10 OUT_C
9 NC
Features
• Low power 120µA typical supply current (ISL28278)
• 225μV max offset voltage
• 30pA max input bias current
• 300kHz typical gain-bandwidth product
• 105dB typical PSRR
• 100dB typical CMRR
• Single supply operation down to 2.4V
• Input is capable of swinging above V+ and below V-
(ground sensing)
• Rail-to-rail input and output (RRIO)
• Enable Pin (ISL28278 only)
• Pb-free plus anneal available (RoHS compliant)
Applications
• Battery- or solar-powered systems
• 4mA to 25mA current loops
• Handheld consumer products
• Medical devices
• Thermocouple amplifiers
• Photodiode pre-amps
• pH probe amplifiers
Ordering Information
PART NUMBER
(Note)
PART
MARKING
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL28278FAZ*
28278FAZ 16 Ld QSOP MDP0040
ISL28478FAZ*
28478FAZ 16 Ld QSOP MDP0040
*“-T7” suffix is for tape and reel. Please refer to TB347 for details on
reel specifications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100%
matte tin plate termination finish, which are RoHS compliant and
compatible with both SnPb and Pb-free soldering operations.
Intersil Pb-free products are MSL classified at Pb-free peak reflow
temperatures that meet or exceed the Pb-free requirements of
IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2006, 2007. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.