English
Language : 

ISL28166 Datasheet, PDF (1/12 Pages) Intersil Corporation – 39uA Micropower Single and Dual Rail-to-Rail Input-Output Low Input Bias Current (RRIO) Op Amps
®
Data Sheet
ISL28166, ISL28266
February 27, 2007
FN6155.2
39µA Micropower Single and Dual
Rail-to-Rail Input-Output Low Input Bias
Current (RRIO) Op Amps
The ISL28166 and ISL28266 are micropower precision
operational amplifiers optimized for single supply operation
at 5V and can operate down to 2.4V.
These devices feature an Input Range Enhancement Circuit
(IREC) which enables them to maintain CMRR performance
for input voltages greater than the positive supply. The input
signal is capable of swinging 0.5V above a 5.0V supply (0.25
for a 2.5V supply) and to within 10mV from ground. The
output operation is rail-to-rail.
The 1/f corner of the voltage noise spectrum is at 1kHz. This
results in low frequency noise performance which can only
be found on devices with an order of magnitude higher
supply current.
ISL28166 and ISL28266 can be operated from one lithium
cell or two Ni-Cd batteries. The input range includes both
positive and negative rail. The output swings to both rails.
Ordering Information
PART NUMBER PART
(Note)
MARKING
TAPE
AND
REEL
PACKAGE PKG.
(Pb-free) DWG. #
ISL28166FHZ-T7 GABY
7” (3k pcs) 6 Ld SOT-23 MDP0038
Tape and Reel
Coming Soon
ISL28266FAZ-T7
7”
8 Ld MSOP MDP0043
Tape and Reel
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• 39µA typical supply current
• 5nA max. input bias current
• 250kHz gain bandwidth product (AV = 1)
• 2.4V to 5V single supply voltage range
• Rail-to-rail input and output
• Enable pin (ISL28166 only)
• Pb-free plus anneal available (RoHS compliant)
Applications
• Battery- or solar-powered systems
• 4mA to 20mA current loops
• Handheld consumer products
• Medical devices
• Sensor amplifiers
• ADC buffers
• DAC output amplifiers
Pinouts
ISL28166
(6 LD SOT-23)
TOP VIEW
OUT 1
6 V+
V- 2
5 ENABLE
+-
IN+ 3
4 IN-
ISL28266
(8 LD MSOP) Coming Soon
TOP VIEW
OUT_A 1
8 V+
IN-_A 2
IN+_A 3
V- 4
-+
+-
7 OUT_B
6 IN-_B
5 IN+_B
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006, 2007. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.