|
ISL1571 Datasheet, PDF (1/2 Pages) Intersil Corporation – Power Line Communication PLC | |||
|
®
Data Sheet
September 3, 2009
ISL1571
FN6387.1
Power Line Communication (PLC)
Features
The ISL1571 is a dual operational amplifier designed for
PLC line driving in OFDM and SSC based solutions. This
device features a high drive capability of 750mA while
consuming only 6mA of supply current per amplifier and
operating from a single 4.5V to 12V supply. The driver
achieves a typical distortion of -80dBc, at 150kHz into a 25Ω
load.
The ISL1571 is available in the thermally-enhanced
16 Ld QFN or 10 Ld HMSOP package and is specified for
operation over the full -40°C to +85°C temperature range. The
ISL1571 has control pins BIAS0 and BIAS1 for controlling the
bias and enable/disable of the outputs. These controls allow
for lowering the power to fit the performance/power ratio for
the application.
⢠21dBm output power capability
⢠Drives up to 750mA from a +12V supply
⢠20VP-P differential output drive into 21Ω
⢠Very low noise floor
⢠-75dBc typical driver output distortion at 4MHz
⢠-80dBc typical driver output distortion at 10MHz
⢠-79dBc typical driver output distortion at 17MHz
⢠Low quiescent current of 6mA per amplifier
⢠Supply range
- For ISL1571IUEZ 4.5V to 12V
- For ISL1571IRZ ±2.25V to ±6V, 4.5V to 12V
The ISL1571 is ideal for line driving applications following
the Homeplug 1.0, Homeplug AV and UPA standard based
PLC.
Get Full Datasheet
⢠250MHz bandwidth
⢠Thermal shutdown
⢠Pb-free (RoHS compliant)
Applications
⢠Homeplug 1.0
⢠Homeplug AV
⢠UPA digital home standard
Ordering Information
PART NUMBER
(Note)
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
ISL1571IRZ
157 1IRZ
-40 to +85
16 Ld QFN
MDP0046
ISL1571IRZ-T7*
157 1IRZ
-40 to +85
16 Ld QFN (Tape and Reel)
MDP0046
ISL1571IUEZ
BBBDA
-40 to +85
10 Ld HMSOP
MDP0050
ISL1571IUEZ-T7*
BBBDA
-40 to +85
10 Ld HMSOP (Tape and Reel) MDP0050
*Please refer to TB347 for details on reel specifications
NOTE: These Intersil Pb-free plastic packaged products employ special Pb-free material sets, molding compounds/die attach materials, and 100%
matte tin plate plus anneal (e3 termination finish, which is RoHS compliant and compatible with both SnPb and Pb-free soldering operations).
Intersil Pb-free products are MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J
STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2008, 2009. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
|
▷ |