ISL1556 Datasheet, PDF (1/2 Pages) Intersil Corporation – xDSL Differential Line Driver

®
Data Sheet
September 29, 2006
ISL1556
FN6286.1
xDSL Differential Line Driver
The ISL1556 is a dual operational amplifier designed for
VDSL and ADSL line driving in DMT based solutions. This
device features a high drive capability of 350mA while
consuming only 4.5mA of supply current per amplifier and
operating from a single 4.5V to 12V supply. The driver
achieves a typical distortion of -80dBc, at 150kHz into a 25Ω
load.
The ISL1556 is available in the thermally-enhanced
16 Ld QFN package and is specified for operation over the
full -40°C to +85°C temperature range. The ISL1556 has
control pins C₀ and C₁ for controlling the bias and
enable/disable of the outputs. These controls allow for
lowering the power to fit the performance/power ratio for the
application.
The ISL1556 is ideal for ADSL2+, SDSL, HDSL2 and VDSL
line driving applications, including both 14.5dBm and
17.5dBm applications.
Features
• 17.5dBm output power capability
• Drives up to 350mA from a +12V supply
• 20V_P-P differential output drive into 50Ω
• -80dBc typical driver output distortion at full output at
150kHz
• -70dBc typical driver output distortion at 4MHz
• -70dBc typical driver output distortion at 10MHz
• -65dBc typical driver output distortion at 17MHz
• -60dBc typical driver output distortion at 30MHz
• Low quiescent current of 4.5mA per amplifier
• Supply range
- For ISL1556IUE 4.5V to 12V
- For ISL1556IR ±2.25V to ±6V, 4.5V to 12V
• 300MHz bandwidth
• Thermal shutdown
• Pb-free plus anneal available (RoHS compliant)
Applications
• Differential load driving only
• VDSL2 CO/CPE up to 17.5dBm
• Power line communications line drivers
• ADSL2+ CPE line driving
• G.SHDSL, HDSL2 line drivers
Ordering Information
PART NUMBER (Note) PART MARKING TAPE AND REEL TEMP. RANGE (°C)
PACKAGE (Pb-Free)
PKG. DWG. #
ISL1556IRZ
6IRZ
-
-40 to +85
16 Ld QFN (Pb-free)
MDP0046
ISL1556IRZ-T7
6IRZ
7”
-40 to +85
16 Ld QFN (Pb-free)
MDP0046
ISL1556IRZ-T13
6IRZ
13”
-40 to +85
16 Ld QFN (Pb-free)
MDP0046
ISL1556IUEZ
BBYAA
-
-40 to +85
10 Ld HMSOP (Pb-free) MDP0050
ISL1556IUEZ-T7
BBYAA
7”
-40 to +85
10 Ld HMSOP (Pb-free) MDP0050
ISL1556IUEZ-T13
BBYAA
13”
-40 to +85
10 Ld HMSOP (Pb-free) MDP0050
NOTE: Intersil Pb-free plus anneal products employ special Pb-free material sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which are RoHS compliant and compatible with both SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Get Full Datasheet
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2006. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.