English
Language : 

HSP43216 Datasheet, PDF (1/19 Pages) Intersil Corporation – Halfband Filter
Data Sheet
HSP43216
January 1999 File Number 3365.7
Halfband Filter
The HSP43216 Halfband Filter addresses a wide variety of
applications by combining fS/4 (fS = sample frequency)
quadrature up/down convert circuitry with a fixed coefficient
halfband filter processor as shown in the block diagram.
These elements may be configured to operate in one of the
four following modes: decimate by 2 filtering of a real input
signal; interpolate by 2 filtering of a real input signal; fS/4
quadrature down conversion of a real input signal followed
by decimate-by-2 filtering to produce a complex analytic
signal; interpolate-by-2 filtering of a complex analytic signal
followed by fS/4 quadrature up conversion to produce a real
valued output.
The frequency response of the HSP43216's halfband filter
has a shape factor, (passband+transition band)/passband,
of 1.24:1 with 90dB of stopband attenuation. The passband
has less than 0.0003dB of ripple from 0fS to 0.2fS with
stopband attenuation of greater than 90dB from 0.3fS to
Nyquist. At 0.25fS the filter provides 6dB of attenuation.
The HSP43216 processes data streams with word widths up
to 16 bits and data rates up to 52 MSPS. The processing
throughput of the part is easily doubled to rates of up to 104
MSPS by using the part together with an external multiplexer
or demultiplexer. Programmable rounding is provided to
support output precisions from 8 bits to 16 bits.
Ordering Information
PART
NUMBER
HSP43216GC-52
HSP43216JC-52
HSP43216VC-52
TEMP.
PACKAGE
RANGE (oC)
TYPE
0 to 70 85 Ld CPGA
0 to 70 84 Ld PLCC
0 to 70 100 Ld MQFP
PKG. NO.
G85.A
N84.1.15
Q100.14x20
Features
• Sample Rates to 52 MSPS
• Architected to Support Sample Rates to 104 MSPS Using
External Multiplexer
• Four Modes of Operation:
- Interpolate by 2 Filtering
- Decimate by 2 Filtering
- Quadrature to Real Signal Conversion
- fS/4 Quadrature Down Conversion Followed by
Decimate by 2 Filtering
• 16-Bit Inputs and Outputs
• 67-Tap Halfband FIR Filter with 20-Bit Coefficients
• Two’s Complement or Offset Binary Outputs
• Programmable Rounding on Outputs
• 1.24:1 Filter Shape Factor
• >90dB Stopband Attenuation
• <0.0003dB Passband Ripple
• Saturation Logic on Output
Applications
• Digital Down Conversion
• D/A and A/D pre/post Filtering
• Tuning Bandwidth Expansion for HSP45116 and
HSP45106
Block Diagram
AIN0-15
BIN0-15
INPUT DATA
FLOW
CONTROLLER
SYNC
USB/LSB
MODE0-1
INT/EXT
RND0-2
FMT
OEA
OEB
CLK
fS/4
QUADRATURE
DOWN
CONVERT
PROCESSOR
67-TAP
HALFBAND
FILTER
PROCESSOR
fS/4
QUADRATURE
UP CONVERT
PROCESSOR
OUTPUT DATA
FLOW
CONTROLLER/
FORMATTER
AOUT0-15
BOUT0-15
3-193
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999