|
HS-565ARH-T Datasheet, PDF (1/6 Pages) Intersil Corporation – Radiation Hardened High Speed, Monolithic Digital-to-Analog Converter | |||
|
Data Sheet
HS-565ARH-T
July 1999 File Number 4607.1
Radiation Hardened High Speed,
Monolithic Digital-to-Analog Converter
Intersilâs Satellite Applications FlowTM (SAF) devices are fully
tested and guaranteed to 100kRAD total dose. This QML
Class T device is processed to a standard ï¬ow intended to
meet the cost and shorter lead-time needs of large volume
satellite manufacturers, while maintaining a high level of
reliability.
The HS-565ARH-T is a fast, radiation hardened 12-bit
current output, digital-to-analog converter. The monolithic
chip includes a precision voltage reference, thin-ï¬lm R-2R
ladder, reference control ampliï¬er and twelve high-speed
bipolar current switches.
The Intersil Semiconductor Dielectric Isolation process
provides latch-up free operation while minimizing stray
capacitance and leakage currents, to produce an excellent
combination of speed and accuracy. Also, ground currents
are minimized to produce a low and constant current through
the ground terminal, which reduces error due to code-
dependent ground currents.
HS-565ARH-T die are laser trimmed for a maximum integral
nonlinearity error of ±0.25 LSB at 25oC. In addition, the low
noise buried zener reference is trimmed both for absolute value
and minimum temperature coefficient.
Speciï¬cations
Speciï¬cations for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD
numbers listed below must be used when ordering.
Detailed Electrical Speciï¬cations for the HS-565ARH-T
are contained in SMD 5962-96755. A âhot-linkâ is provided
from our website for downloading.
www.intersil.com/spacedefense/newsafclasst.asp
Intersilâs Quality Management Plan (QM Plan), listing all
Class T screening operations, is also available on our
website.
www.intersil.com/quality/manuals.asp
Ordering Information
ORDERING
NUMBER
PART
NUMBER
TEMP.
RANGE
(oC)
5962R9675501TJC
HS1-565ARH-T
-55 to 125
5962R9675501TXC
HS9-565ARH-T
-55 to 125
NOTE: Minimum order quantity for -T is 150 units through
distribution, or 450 units direct.
Features
⢠qml Class T, Per MIL-PRF-38535
⢠Radiation Performance
- Gamma Dose (γ) 1 x 105 RAD(Si)
- No Latch-Up, Dielectrically Isolated Device Islands
⢠DAC and Reference on a Single Chip
⢠Pin Compatible with AD-565A and HI-565A
⢠Very High Speed: Settles to 0.50 LSB in 500ns Max
⢠Monotonicity Guaranteed Over Temperature
⢠0.50 LSB Max Nonlinearity Guaranteed Over Temperature
⢠Low Gain Drift (Max., DAC Plus Reference) 50ppm/oC
⢠±0.75 LSB Accuracy Guaranteed Over Temperature
(±0.125 LSB Typical at 25oC)
Pinouts
HS1-565ARH-T (SBDIP), CDIP2-T24
TOP VIEW
NC 1
NC 2
VCC 3
REF OUT 4
REF GND 5
REF IN 6
-VEE 7
BIPOLAR RIN 8
IDAC OUT 9
10V SPAN 10
20V SPAN 11
PWR GND 12
24 BIT 1 IN (MSB)
23 BIT 2 IN
22 BIT 3 IN
21 BIT 4 IN
20 BIT 5 IN
19 BIT 6 IN
18 BIT 7 IN
17 BIT 8 IN
16 BIT 9 IN
15 BIT 10 IN
14 BIT 11 IN
13 BIT 12 IN (LSB)
HS9-565ARH-T (FLATPACK), CDFP4-F24
TOP VIEW
NC
1
24
NC
2
23
VCC
3
22
REF OUT
4
21
REF GND
5
20
REF IN
6
19
-VEE
7
18
BIPOLAR RIN
8
17
IDAC OUT
9
16
10V SPAN
10
15
20V SPAN
11
14
PWR GND
12
13
BIT 1 IN
(MSB)
BIT 2 IN
BIT 3 IN
BIT 4 IN
BIT 5 IN
BIT 6 IN
BIT 7 IN
BIT 8 IN
BIT 9 IN
BIT 10 IN
BIT 11 IN
BIT 12 IN
(LSB)
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
Satellite Applications Flow⢠(SAF) is a trademark of Intersil Corporation.
|
▷ |