|
HS-5104ARH-T Datasheet, PDF (1/2 Pages) Intersil Corporation – Radiation Hardened Low Noise Quad Operational Amplifier | |||
|
Data Sheet
HS-5104ARH-T
July 1999 File Number 4606.1
Radiation Hardened Low Noise Quad
Operational Ampliï¬er
Intersilâs Satellite Applications FlowTM (SAF) devices are
fully tested and guaranteed to 100kRAD total dose. These
QML Class T devices are processed to a standard ï¬ow
intended to meet the cost and shorter lead-time needs of
large volume satellite manufacturers, while maintaining a
high level of reliability.
The HS-5104ARH-T is a radiation hardened, monolithic
quad operational ampliï¬er that provides highly reliable
performance in harsh radiation environments. Its excellent
noise characteristics coupled with a unique array of dynamic
speciï¬cations make this ampliï¬er well-suited for a variety of
satellite system applications. Dielectrically isolated, bipolar
processing makes this device immune to Single Event
Latch-up.
The HS-5104ARH-T shows almost no change in offset
voltage after exposure to 100K RAD(Si) gamma radiation,
with only a minor increase in current. Complementing these
speciï¬cations is a post radiation open loop gain in excess of
40K.
This quad operational ampliï¬er is available in an industry
standard pinout, allowing for immediate interchangeability
with most other quad operational ampliï¬ers.
Speciï¬cations
Speciï¬cations for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD
numbers listed below must be used when ordering.
Detailed Electrical Speciï¬cations for the HS-5104ARH-T
are contained in SMD 5962-95690. A âhot-linkâ is provided
from our website for downloading.
www.intersil.com/spacedefense/newsafclasst.asp
Intersilâs Quality Management Plan (QM Plan), listing all
Class T screening operations, is also available on our
website.
www.intersil.com/quality/manuals.asp
Ordering Information
ORDERING
NUMBER
PART
NUMBER
TEMP.
RANGE
(oC)
5962R9569001TCC
HS1-5104ARH-T
-55 to 125
HS1-5104ARH/Proto
HS1-5104ARH/Proto
-55 to 125
5962R9569001TXC
HS9-5104ARH-T
-55 to 125
HS9-5104ARH/Proto
HS9-5104ARH/Proto
-55 to 125
NOTE: Minimum order quantity for -T is 150 units through
distribution, or 450 units direct.
Features
⢠QML Class T, Per MIL-PRF-38535
⢠Radiation Performance
- Gamma Dose (γ) 1 x 105 RAD(Si)
- No Latch-Up, Dielectrically Isolated Device Islands
⢠Low Noise
- At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . 4.3nV/âHz (Typ)
- At 1kHz . . . . . . . . . . . . . . . . . . . . . . . . 0.6pA/âHz (Typ)
⢠Low Offset Voltage . . . . . . . . . . . . . . . . . . . . 3.0mV (Max)
⢠High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 2.0V/µs (Typ)
⢠Gain Bandwidth Product . . . . . . . . . . . . . . . 8.0MHz (Typ)
Pinouts
HS1-5104ARH-T (SBDIP), CDIP2-T14
TOP VIEW
OUT 1 1
-IN1 2
+IN1 3
V+ 4
+IN2 5
-IN2 6
OUT 2 7
14 OUT 4
13 -IN4
12 +IN4
11 V-
10 +IN3
9 -IN3
8 OUT 3
HS9-5104ARH-T (FLATPACK), CDFP3-F14
TOP VIEW
OUT 1
-IN1
+IN1
V+
+IN2
-IN2
OUT 2
1
14
2
13
3
12
4
11
5
10
6
9
7
8
OUT 4
-IN4
+IN4
V-
+IN3
-IN3
OUT 3
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
Satellite Applications Flow⢠(SAF) is a trademark of Intersil Corporation.
|
▷ |