HS-3530RH Datasheet, PDF (1/12 Pages) Intersil Corporation – Low Power, Radiation Hardened Programmable Operational Amplifier

HS-3530RH
August 1995
Low Power, Radiation Hardened
Programmable Operational Amplifier
Features
Pinout
• Radiation Environment
- Neutron Fluence (Φ) 5 x 10¹² n/cm² (E ≥ 10KeV)
- Gamma Rate ^(γ) 1 x 10⁹ RAD (Si)/s
- Gamma Dose (γ) 1 x 10⁶ RAD (Si)
• Wide Range AC Programming
- Slew Rate 0.06 to 3V/µs
- Gain X Bandwidth 100kHz to 5.0MHz
• Wide Range DC Programming
- Power Supply Range ±3.0V to ±15V
• Supply Current 10µA to 1.2mA
• Dielectrically Isolated Device Islands
8 LEAD METAL CAN PACKAGE (CAN)
MIL-STD-1835 MACY1-X8
TOP VIEW
OFFSET
NULL
1
INVERTING
INPUT
2
ISET
8
7 V+
6 OUTPUT
NON-INVERTING 3
5 ^OFFSET
INPUT
4
NULL
V-
• Short Circuit Protection
Description
NOTE:
1. Case tied to V-.
The HS-3530RH is a Low Power Operational Amplifier which
is an internally compensated monolithic device offering a
wide range of performance specifications. Parameters such
as power dissipation, slew rate, bandwidth, noise and input
DC parameters are programmed by selecting an external
resistor or current source. Supply voltages as low as ±3V
may be used with little degradation of AC performance. The
HS-3530RH has been specifically designed to meet
exposure to space radiation environments. Operation from -55^oC
to +125^oC is guaranteed.
A major advantage of the HS-3530RH is that operating
characteristics remain virtually constant over a wide supply
range (±3V to ±15V), allowing the amplifier to offer maximum
performance in almost any system, including battery
operated equipment. A primary application for this device is
in active filtering and conditioning for a wide variety of
signals that differ in frequency and amplitude. Also, by
modulating the set current, it can be used for designs such
as current controlled oscillators/modulators, sample and
hold circuits and variable active filters.
Functional Diagram
+V
OFFSET
NULL 2
7
2
-IN
+IN ³
5
6
8
1
4
OUT
ISET
-V
OFFSET
NULL 1
Ordering Information
PART NUMBER
HS2-3530RH-8
HS2-3530RH-Q
HS2-3530RH/SAMPLE
TEMPERATURE
RANGE
PACKAGE
-55^oC to +125^oC 8 Lead Metal Can
-55^oC to +125^oC 8 Lead Metal Can
+25^oC
8 Lead Metal Can
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
762
Spec Number 518079
File Number 3024.2