HS-26CLV32RH_13 Datasheet, PDF (1/3 Pages) Intersil Corporation – Radiation Hardened 3.3V Quad Differential Line Receiver

Radiation Hardened 3.3V Quad Differential Line
Receiver
HS-26CLV32RH, HS-26CLV32EH
The Intersil HS-26CLV32RH, HS-26CLV32EH are radiation
hardened 3.3V quad differential line receiver designed for
digital data transmission over balanced lines, in low voltage,
RS-422 protocol applications. Radiation hardened CMOS
processing assures low power consumption, high speed, and
reliable operation in the most severe radiation environments.
The HS-26CLV32RH, HS-26CLV32EH have an input sensitivity
of 200mV (Typ) over a common mode input voltage range of
-4V to +7V. The receivers are also equipped with input fail safe
circuitry, which causes the outputs to go to a logic “1” when
the inputs are open. The device has unique inputs that remain
high impedance when the receiver is disabled or powered-down,
maintaining signal integrity in multi-receiver applications.
Specifications for Rad Hard QML devices are controlled by the
Defense Logistics Agency Land and Maritime (DLA). The SMD
numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95689. A “hot-link” is provided on our
homepage for downloading.
Features
• Electrically screened to SMD # 5962-95689
• QML qualified per MIL-PRF-38535 requirements
• 1.2 micron radiation hardened CMOS
- Total dose . . . . . . . . . . . . . . . . . . . . . . . . . 300 krad(Si)(max)
- Single event upset LET . . . . . . . . . . . . . 100MeV/mg/cm²)
- Single event latch-up immune
• Low stand-by current . . . . . . . . . . . . . . . . . . . . . . . 13mA(max)
• Operating supply range . . . . . . . . . . . . . . . . . . . . . 3.0V to 3.6V
• Enable input levels. . . . . . . .V_IH > (0.7)(V_DD); V_IL < (0.3)(V_DD)
• CMOS output levels . . . . . . . . . . . . . . V_OH > 2.55V; V_OL < 0.4V
• Input fail safe circuitry
• High impedance inputs when disabled or powered-down
• Full -55°C to +125°C military temperature range
• Pb-free (RoHS compliant)
Applications
• Line receiver for MIL-STD-1553 serial data bus
Ordering Information
PART NUMBER
(Note)
INTERNAL
MKT. NUMBER
PART
MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
5962F9568902QEC
HS1-26CLV32RH-8
Q 5962F95 68902QEC
-55 to +125
16 Ld SBDIP
D16.3
5962F9568902QXC
HS9-26CLV32RH-8
Q 5962F95 68902QXC
-55 to +125
16 Ld FLATPACK K16.A
5962F9568902VEC
HS1-26CLV32RH-Q
Q 5962F95 68902VEC
-55 to +125
16 Ld SBDIP
D16.3
5962F9568902VXC
HS9-26CLV32RH-Q
Q 5962F95 68902VXC
-55 to +125
16 Ld FLATPACK K16.A
5962F9666302V9A
HS0-26CLV31RH-Q
-55 to +125
Die
HS0-26CLV31RH/SAMPLE HS0-26CLV31RH/SAMPLE
-55 to +125
Die
HS1-26CLV32RH/PROTO HS1-26CLV32RH/PROTO
HS1- 26CLV32RH /PROTO
-55 to +125
16 Ld SBDIP
D16.3
HS9-26CLV32RH/PROTO HS9-26CLV32RH/PROTO
HS9- 26CLV32RH /PROTO
-55 to +125
16 Ld FLATPACK K16.A
5962F9568904VEC
HS1-26CLV32EH-Q
Q 5962F95 68904VEC
-55 to +125
16 Ld SBDIP
D16.3
5962F9568904VXC
HS9-26CLV32EH-Q
Q 5962F95 68904VXC
-55 to +125
16 Ld FLATPACK K16.A
5962F9568904V9A
HS0-26CLV32EH-Q
-55 to +125
Die
NOTE: These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible with
both SnPb and Pb-free soldering operations.
January 8, 2013
FN4907.4
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 |Copyright Intersil Americas Inc. 2000, 2008, 2009, 2012, 2013. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.