HS-26CLV31RH Datasheet, PDF (1/3 Pages) Intersil Corporation – Radiation Hardened 3.3V Quad Differential Line Driver

®
Data Sheet
HS-26CLV31RH
May 28, 2009
FN4898.2
[ /Title
(HS-
26C31
RH)
/Subje
ct
(Radia
tion
Harde
ned
Quad
Differe
ntial
Line
Driver)
/Autho
r ()
/Keyw
ords
(Inters
il
Corpo
ration,
semic
onduc
tor,
Radiat
ion
Harde
ned,
RH,
Rad
Hard,
QML,
Satellit
e,
SMD,
Class
V,
Data
Radiation Hardened 3.3V Quad Differential
Line Driver
The Intersil HS-26CLV31RH is a radiation hardened 3.3V
quad differential line driver designed for digital data
transmission over balanced lines, in low voltage, RS-422
protocol applications. CMOS processing assures low power
consumption, high speed, and reliable operation in the most
severe radiation environments.
The HS-26CLV31RH accepts CMOS level inputs and converts
them to differential outputs. Enable pins allow several devices
to be connected to the same data source and addressed
independently. The device has unique outputs that become
high impedance when the driver is disabled or powered-down,
maintaining signal integrity in multi-driver applications.
Specifications
Specifications for Rad Hard QML devices are controlled by
the Defense Supply Center in Columbus (DSCC). The SMD
numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-96663. A “hot-link” is provided
on our homepage for downloading.
www.intersil.com/military/
Features
• Electrically Screened to SMD # 5962-96663
• QML Qualified per MIL-PRF-38535 Requirements
• 1.2 Micron Radiation Hardened CMOS
- Total Dose. . . . . . . . . . . . . . . . . . . . . 300 krad(Si)(Max)
- Single Event Upset LET . . . . . . . . . . . 100MeV/mg/cm²)
- Single Event Latch-up Immune
• Extremely Low Stand-by Current . . . . . . . . . .100µA (Max)
• Operating Supply Range . . . . . . . . . . . . . . . . 3.0V to 3.6V
• CMOS Level Inputs . . .V_IH > (0.7)(V_DD); V_IL < (0.3)(V_DD)
• Differential Outputs. . . . . . . . . . . V_OH > 1.8V; V_OL < 0.5V
• High Impedance Outputs when Disabled or Powered
Down
• Low Output Impedance . . . . . . . . . . . . . . . . . 10Ω or Less
• Full -55°C to +125°C Military Temperature Range
• Pb-Free (RoHS Compliant)
Applications
• Line Transmitter for MIL-STD-1553 Serial Data Bus
Ordering Information
ORDERING NUMBER
(Note)
INTERNAL
MKT. NUMBER
PART MARKING
TEMP. RANGE
(°C)
PACKAGE
(Pb-Free)
PKG.
DWG. #
5962F9666302QEC
HS1-26CLV31RH-8
Q 5962F96 66302QEC
-55 to +125 16 LD SBDIP
D16.3
5962F9666302QXC
HS9-26CLV31RH-8
Q 5962F96 66302QXC
-55 to +125 16 LD FLATPACK K16.A
5962F9666302VEC
HS1-26CLV31RH-Q
Q 5962F96 66302VEC
-55 to +125 16 LD SBDIP
D16.3
5962F9666302VXC
HS9-26CLV31RH-Q
Q 5962F96 66302VXC
-55 to +125 16 LD FLATPACK K16.A
HS1-26CLV31RH/PROTO HS1-26CLV31RH/PROTO HS1- 26CLV31RH /PROTO -55 to +125 16 LD SBDIP
D16.3
HS9-26CLV31RH/PROTO HS9-26CLV31RH/PROTO HS9- 26CLV31RH /PROTO -55 to +125 16 LD FLATPACK K16.A
NOTE: These Intersil Pb-free Hermetic packaged products employ 100% Au plate - e4 termination finish, which is RoHS compliant and compatible
with both SnPb and Pb-free soldering operations.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2000, 2008, 2009. All Rights Reserved
Satellite Applications Flow™ (SAF) is a trademark of Intersil Corporation. All other trademarks mentioned are the property of their