HS-2620RH Datasheet, PDF (1/5 Pages) Intersil Corporation – Radiation Hardened, Very Wideband, High Input Impedance Uncompensated Operational Amplifiers

Data Sheet
HS-2620RH, HS-2622RH
August 1999 File Number 4014.1
Radiation Hardened, Very Wideband, High
Input Impedance Uncompensated
Operational Amplifiers
HS-2620RH and HS-2622RH are radiation hardened bipolar
operational amplifiers that feature very high input impedance
coupled with wideband AC performance. The high resistance
of the input stage is complemented by low offset voltage (4mV
Max at 25^oC for HS-2620RH) and low bias and offset current
(15nA Max at 25^oC for HS-2620RH) to facilitate accurate
signal processing. Offset voltage can be reduced further by
means of an external nulling potentiometer. Closed loop gains
greater than 5, the 25V/µs minimum slew rate at 25^oC and the
100kV/V minimum open loop gain at 25^oC, enables the
HS-2620RH to perform high gain amplification of very fast,
wideband signals. These dynamic characteristics, coupled
with fast settling times, make these amplifiers ideally suited to
pulse amplification designs as well as high frequency or video
applications. The frequency response of the amplifier can be
tailored to exact design requirements by means of an external
bandwidth control capacitor. Other high performance designs
such as high gain, low distortion audio amplifiers, high-Q and
wideband active filters and high speed comparators are
excellent uses of this part.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95688. A “hot-link” is provided
on our homepage for downloading.
www.intersil.com/spacedefense/space.asp
Features
• Electrically Screened to SMD # 5962-95688
• QML Qualified per MIL-PRF-38535 Requirements
• High Input Impedance (HS-2620RH) . . . . . . . 65MΩ (Min)
• High Gain (HS-2620RH) . . . . . . . . . . . . . . . . 100kV/V (Min)
150kV/V (Typ)
• High Slew Rate (HS-2620RH) . . . . . . . . . . . . . . 25V/µs (Min)
35V/µs (Typ)
• Low Input Bias Current (HS-2620RH) . . . . . . . 15nA (Max)
5nA (Typ)
• Low Input Offset Voltage (HS-2620RH) . . . . . . 4mV (Max)
• Wide Gain Bandwidth Product (AV ≥ 5) . . . . . .100MHz (Typ)
• Output Short Circuit Protection
• Total Dose . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 x 10⁴ RAD(Si)
Applications
• Video and RF Amplifiers
• Pulse Amplifiers
• Audio Amplifiers and Filters
• High-Q Active Filters
• High Speed Comparators
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
5962D9568801VGA HS2-2620RH-Q
5962D9568801VPA
HS7-2620RH-Q
5962D9568801VPC
HS7B-2620RH-Q
5962D9568802VGA HS2-2622RH-Q
5962D9568802VPA
HS7-2622RH-Q
5962D9568802VPC
HS7B-2622RH-Q
TEMP. RANGE
(^oC)
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
Pinouts
HS7-2620RH, HS7-2622RH (CERDIP) GDIP1-T8
OR
HS7B-2620RH, HS7B-2622RH (SBDIP) CDIP2-T8
TOP VIEW
BAL 1
-IN 2
-
+IN 3
+
V- 4
8 COMP
7 V+
6 OUT
5 BAL
HS2-2620RH, HS2-2622RH (CAN) MACY1-X8
TOP VIEW
COMP
8
BAL 1
7 V+
IN- ²
-
+
6 OUT
IN+ ³
5 BAL
4
V-
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999