|
HS-2510RH Datasheet, PDF (1/7 Pages) Intersil Corporation – Radiation Hardened High Slew Rate Operational Amplifier | |||
|
Data Sheet
HS-2510RH
August 1999 File Number 3592.2
Radiation Hardened High Slew Rate
Operational Ampliï¬er
The HS-2510RH is a radiation hardened high performance
operational ampliï¬er which set the standard for maximum
slew rate and wide bandwidth operation in moderately
powered, internally compensated, monolithic devices. In
addition to excellent dynamic characteristics, this
dielectrically isolated ampliï¬er also offers low offset current
and high input impedance.
The ±50V/ms minimum slew rate and fast settling time of the
HS-2510RH are ideally suited for high speed D/A, A/D, and
pulse ampliï¬cation designs. The HS-2510RH superior
bandwidth and 750kHz minimum full power bandwidth are
extremely useful in RF and video applications. To insure
compliance with slew rate and transient response
speciï¬cations, all devices are 100% tested for AC
performance characteristics over full temperature limits. To
improve signal conditioning accuracy, the HS-2510RH
provides a maximum offset current of 25nA and a minimum
input impedance of 50Mâ¦, both at 25oC, as well as offset
voltage trim capability.
Speciï¬cations for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Speciï¬cations for these devices are
contained in SMD 5962-95686. A âhot-linkâ is provided
on our homepage for downloading.
www.intersil.com/spacedefense/space.asp
Pinouts
HS-2510RH GDIP1-T8 (CERDIP)
OR
HS-2510RH CDIP2-T8 (SBDIP)
TOP VIEW
BAL 1
IN- 2 -
+
IN+ 3
V- 4
8 COMP
7 V+
6 OUT
5 BAL
Features
⢠Electrically Screened to SMD # 5962-95686
⢠QML Qualiï¬ed per MIL-PRF-38535 Requirements
⢠High Slew Rate. . . . . . . . . . . . 50V/µs (Min), 65V/µs (Typ)
⢠Wide Power Bandwidth . . . . . . . . . . . . . . . . 750kHz (Min)
⢠Low Offset Current . . . . . . . . . . . . 25nA (Min), 10nA (Typ)
⢠High Input Impedance . . . . . . . 50M⦠(Min), 100M⦠(Typ)
⢠Wide Small Signal Bandwidth . . . . . . . . . . . .12MHz (Typ)
⢠Fast Settling Time (0.1% of 10V Step) . . . . . . 250ns (Typ)
⢠Low Quiescent Supply Current. . . . . . . . . . . . . 6mA (Max)
⢠Internally Compensated For Unity Gain Stability
⢠Total Gamma Dose. . . . . . . . . . . . . . . . . . . . . 10kRAD(Si)
Applications
⢠Data Acquisition Systems
⢠RF Ampliï¬ers
⢠Video Ampliï¬ers
⢠Signal Generators
⢠Pulse Ampliï¬cation
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
5962D9568601VPA
HS7-2510RH-Q
5962D9568601VPC
HS7B-2510RH-Q
5962D9568601VXC
HS9-2510RH-Q
TEMP. RANGE
(oC)
-55 to 125
-55 to 125
-55 to 125
HS-2510RH
CDFP3-F14 (FLATPACK)
TOP VIEW
NC 1
COMP 2
BAL 3
IN- 4
-
+
IN+ 5
NC 6
NC 7
14 NC
13 V+
12 OUT
11 BAL
10 V-
9 NC
8 NC
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
|
▷ |