HS-2400RH_00 Datasheet, PDF (1/3 Pages) Intersil Corporation – Radiation Hardened PRAM Four Channel Programmable Operational Amplifier

TM
Data Sheet
HS-2400RH
August 2000 File Number 4027.2
Radiation Hardened PRAM Four Channel
Programmable Operational Amplifier
HS-2400RH is a four-channel programmable amplifier
providing a level of versatility unsurpassed by any other
monolithic operational amplifier. Versatility is achieved by
employing four input amplifier channels, any one (or none) of
which may be electronically selected and connected to a
single output stage through DTL/TTL compatible address
inputs. The device formed by the output and the selected
pair of inputs is an op amp which delivers excellent slew rate,
gain bandwidth and power bandwidth performance. Other
advantageous features for these dielectrically isolated
amplifiers include high voltage gain and input impedance
coupled with low input offset voltage and offset current.
External compensation is not required on this device at
closed loop gains greater than 10.
Each channel of the HS-2400RH can be controlled and
operated with suitable feedback networks in any of the
standard op amp configurations. This specialization makes
these amplifiers excellent components for multiplexing signal
selection and mathematical function designs. With 20V/µs
slew rate, 20MHz gain bandwidth and low input bias currents
make these devices ideal building blocks for signal
generators, active filters and data acquisition designs.
Programmability, coupled with 9mV maximum offset voltage
and 50nA offset current, make these amplifiers outstanding
components for signal conditioning circuits.
Specifications for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Specifications for these devices are
contained in SMD 5962-95684. A “hot-link” is provided
on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
Ordering Information
ORDERING NUMBER
5962D9568401VEA
INTERNAL
MKT. NUMBER
HS1-2400RH-Q
TEMP. RANGE
(^oC)
-55 to 125
Features
• Electrically Screened to SMD # 5962-95684
• QML Qualified per MIL-PRF-38535 Requirements
• Total Dose . . . . . . . . . . . . . . . . . . . . . . . 10 krad(Si) (Max)
• Digital Programmability
• High Rate Slew
- Uncompensated . . . . . . . . . . . . . . . . . . . . . .20V/µs Min
- Compensated . . . . . . . . . . . . . . . . . . . . . . . . .6V/µs Min
• Wide Gain Bandwidth
- Uncompensated . . . . . . . . . . . . . . . . . . . . . .20MHz Min
- Compensated . . . . . . . . . . . . . . . . . . . . . . . . .4MHz Min
• High Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . . .50kV/V Min
• Low Offset Current . . . . . . . . . . . . . . . . . . . . . . .50nA Max
• Single Capacitor Compensation for Unity Gain
• DTL/TTL Compatible Inputs
Applications
• Signal Selection/Multiplexing
• Operational Amplifier Gain Stage
• Oscillator Frequency
• Filter Characteristics
• Add-Subtract Functions
• Integrator Characteristics
• Comparator Levels
Pinout
16 LEAD CERAMIC DUAL-IN-LINE FRIT SEAL PACKAGE
(CERDIP) MIL-STD-1835 GDIP-T16
TOP VIEW
+IN3 1
+-33
-IN3 2
+IN4 3
-IN4 4
+- ₄
-IN1 5
+IN1 6
+- ¹
-IN2 7
+IN2 8
+- ²
DECODE
CONTROL
16 D0
15 D1
14 ENABLE
13 GND
COMP
12
11 ^V+
10 OUT
OUTPUT AMP ^{9 V-}
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil and Design is a trademark of Intersil Corporation. | Copyright © Intersil Corporation 2000