|
HS-1212RH Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened, Dual, High Speed Low Power, Video Closed Loop Buffer | |||
|
Data Sheet
HS-1212RH
August 1999 File Number 4228.1
Radiation Hardened, Dual, High Speed
Low Power, Video Closed Loop Buffer
The HS-1212RH is a dual closed loop buffer featuring user
programmable gain and high speed performance.
Manufactured on Intersilâs proprietary complementary
bipolar UHF-1 (DI bonded wafer) process, this device offers
wide -3dB bandwidth of 340MHz, very fast slew rate,
excellent gain ï¬atness and high output current. These
devices are QML approved and are processed and screened
in full compliance with MIL-PRF-38535.
A unique feature of the pinout allows the user to select a
voltage gain of +1, -1, or +2, without the use of any external
components. Gain selection is accomplished via
connections to the inputs, as described in the âApplication
Informationâ section. The result is a more ï¬exible product,
fewer part types in inventory, and more efï¬cient use of board
space.
Compatibility with existing op amp pinouts provides ï¬exibility
to upgrade low gain ampliï¬ers, while decreasing component
count. Unlike most buffers, the standard pinout provides an
upgrade path should a higher closed loop gain be needed at
a future date.
Speciï¬cations for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Speciï¬cations for these devices are
contained in SMD 5962-96831. A âhot-linkâ is provided
on our homepage for downloading.
www.intersil.com/spacedefense/space.asp
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
5962F9683101VPA
HS7-1212RH-Q
5962F9683101VPC
HS7B-1212RH-Q
TEMP. RANGE
(oC)
-55 to 125
-55 to 125
Features
⢠Electrically Screened to SMD # 5962-96831
⢠QML Qualiï¬ed per MIL-PRF-38535 Requirements
⢠MIL-PRF-38535 Class V Compliant
⢠User Programmable For Closed-Loop Gains of +1, -1 or
+2 Without Use of External Resistors
⢠Standard Operational Ampliï¬er Pinout
⢠Low Supply Current . . . . . . . . . . . . 5.9mA/Op Amp (Typ)
⢠Excellent Gain Accuracy . . . . . . . . . . . . . . . 0.99V/V (Typ)
⢠Wide -3dB Bandwidth. . . . . . . . . . . . . . . . . .340MHz (Typ)
⢠Fast Slew Rate . . . . . . . . . . . . . . . . . . . . . .1155V/µs (Typ)
⢠High Input Impedance . . . . . . . . . . . . . . . . . . . 1M⦠(Typ)
⢠Excellent Gain Flatness (to 50MHz). . . . . . ±0.02dB (Typ)
⢠Fast Overdrive Recovery . . . . . . . . . . . . . . . . <10ns (Typ)
⢠Total Gamma Dose. . . . . . . . . . . . . . . . . . . . 300kRAD(Si)
⢠Latch Up . . . . . . . . . . . . . . . . . . . . . None (DI Technology)
Applications
⢠Flash A/D Driver
⢠Video Switching and Routing
⢠Pulse and Video Ampliï¬ers
⢠Wideband Ampliï¬ers
⢠RF/IF Signal Processing
⢠Imaging Systems
Pinout
HS-1212RH (CERDIP) GDIP1-T8
OR
HS-1212RH (SBDIP) CDIP2-T8
TOP VIEW
OUT1 1
-IN1 2
+IN1 3
V- 4
-+
+-
8 V+
7 OUT2
6 -IN2
5 +IN2
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
|
▷ |