HS-117RH_03 Datasheet, PDF (1/2 Pages) Intersil Corporation – Radiation Hardened Adjustable Positive Voltage Regulator

®
Data Sheet
October 2003
HS-117RH
FN4560.7
Radiation Hardened
Adjustable Positive Voltage Regulator
The Radiation Hardened HS-117RH is an adjustable
positive voltage linear regulator capable of operating with
input voltages up to 40VDC. The output voltage is adjustable
from 1.2V to 37V with two external resistors. The device is
capable of sourcing from 5mA to 1.25A_PEAK (0.5 A_{PEAK for}
the TO-39 package). ^{Protection is provided by the on-chip}
thermal shutdown and output current limiting circuitry.
The Intersil HS-117RH has advantages over other industry
standard types, in that circuitry is incorporated to minimize
the effects of radiation and temperature on device stability.
Constructed with the Intersil dielectrically isolated Rad Hard
Silicon Gate (RSG) process, the HS-117RH is immune to
single event latch-up and has been specifically designed to
provide highly reliable performance in harsh radiation
environments.
Specifications for Rad Hard QML devices are controlled by the
Defense Supply Center in Columbus (DSCC). The SMD numbers
listed here must be used when ordering.
Detailed electrical specifications for the HS-117RH are
contained in SMD 5962-99547. A “hot-link” is provided on
our website for downloading.
Pinouts
HS2-117RH (TO-39 CAN)
BOTTOM VIEW
ADJUST
2
IN 1
3 OUT
Features
• Electrically Screened to DSSC SMD # 5962-99547
• QML Qualified per MIL-PRF-38535 Requirements
• Radiation Environment
- 300 krad (Si) (Max)
- Latch-up Immune
• Superior Temperature Stability
• Overcurrent and Overtemperature Protection
Applications
• Adjustable Linear Voltage Regulators
• Adjustable Linear Current Regulators
Ordering Information
ORDERING
NUMBER
5962F9954701VUC
5962F9954701QUC
5962F9954701VXC
5962F9954701QXC
5962F9954701VYC
5962F9954701QYC
HS2-117RH/Proto
HS9S-117RH/Proto
INTERNAL
MKT. NUMBER
HS2-117RH-Q
HS2-117RH-8
HS9S-117RH-Q
HS9S-117RH-8
HSYE-117RH-Q
HSYE-117RH-8
HS2-117RH/Proto
HS9S-117RH/Proto
HSYE-117RH/Proto HSYE-117RH/Proto
TEMP. RANGE
(^oC)
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
-55 to 125
HSYE-117RH (SMD.5 CLCC)
BOTTOM VIEW
HS9S-117RH (TO-257AA FLANGE MOUNT)
TOP VIEW
3
IN
2
OUT
1
ADJUST
2
1 - ADJUST
3
2 - IN
3 - OUT
1
NOTE: No current JEDEC outline for the SMD.5 package. Refer to
SMD for package dimensions. The TO-257 is a totally isolated metal
package.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.