|
HS-1135RH Datasheet, PDF (1/5 Pages) Intersil Corporation – Radiation Hardened, High Speed, Low Power Current Feedback Amplifier with Programmable Output Limiting | |||
|
Data Sheet
HS-1135RH
August 1999 File Number 4099.2
Radiation Hardened, High Speed, Low
Power Current Feedback Ampliï¬er with
Programmable Output Limiting
The HS-1135RH is a radiation hardened, high speed, low
power current feedback ampliï¬er built with Intersilâs
proprietary complementary bipolar UHF-1 (DI bonded wafer)
process. They are QML approved and processed in full
compliance with MIL-PRF-38535. This ampliï¬er features
user programmable output limiting, via the VH and VL pins.
The HS-1135RH is the ideal choice for high speed, low
power applications requiring output limiting (e.g., ï¬ash A/D
drivers), especially those requiring fast overdrive recovery
times. The limiting function allows the designer to set the
maximum and minimum output levels to protect downstream
stages from damage or input saturation. The sub-
nanosecond overdrive recovery time ensures a quick return
to linear operation following an overdrive condition.
Component and composite video systems also beneï¬t from
this op ampâs performance, as indicated by the gain ï¬atness,
and differential gain and phase speciï¬cations.
Speciï¬cations for Rad Hard QML devices are controlled
by the Defense Supply Center in Columbus (DSCC). The
SMD numbers listed here must be used when ordering.
Detailed Electrical Speciï¬cations for these devices are
contained in SMD 5962-96767. A âhot-linkâ is provided
on our homepage for downloading.
http://www.intersil.com/spacedefense/space.htm
Ordering Information
ORDERING NUMBER
INTERNAL
MKT. NUMBER
TEMP. RANGE
(oC)
5962F9676701VPA
HS7-1135RH-Q
-55 to 125
5962F9676701VPC
HS7B-1135RH-Q
-55 to 125
HS7-1135RH/PROTO HS7-1135RH/PROTO -55 to 125
Features
⢠Electrically Screened to SMD # 5962-96767
⢠QML Qualiï¬ed per MIL-PRF-38535 Requirements
⢠User Programmable Output Voltage Limiting
⢠Fast Overdrive Recovery . . . . . . . . . . . . . . . . . <1ns (Typ)
⢠Low Supply Current . . . . . . . . . . . . . . . . . . . . 6.9mA (Typ)
⢠Wide -3dB Bandwidth. . . . . . . . . . . . . . . . . .360MHz (Typ)
⢠High Slew Rate. . . . . . . . . . . . . . . . . . . . . .1200V/µs (Typ)
⢠High Input Impedance . . . . . . . . . . . . . . . . . . . 2M⦠(Typ)
⢠Excellent Gain Flatness (to 50MHz). . . . . . ±0.07dB (Typ)
⢠Total Gamma Dose. . . . . . . . . . . . . . . . . . . . 300kRAD(Si)
⢠Latch Up . . . . . . . . . . . . . . . . . . . . . None (DI Technology)
Applications
⢠Flash A/D Driver
⢠Video Switching and Routing
⢠Pulse and Video Ampliï¬ers
⢠Wideband Ampliï¬ers
⢠RF/IF Signal Processing
⢠Imaging Systems
Pinout
HS-1135RH
GDIP1-T8 (CERDIP)
OR CDIP2-TI (SBDIP)
TOP VIEW
NC 1
-IN 2 -
+IN 3 +
V- 4
8 VH
7 V+
6 OUT
5 VL
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
|
▷ |