English
Language : 

HS-1120RH Datasheet, PDF (1/11 Pages) Intersil Corporation – Radiation Hardened, Ultra High Speed Current Feedback Amplifier with Offset Adjust
HS-1120RH
August 1996
Radiation Hardened, Ultra High Speed
Current Feedback Amplifier with Offset Adjust
Features
Description
• Electrically Screened to SMD 5962F9675601VPA
• MIL-PRF-38535 Class V Compliant
• Low Distortion (HD3, 30MHz) . . . . . . . . . . -84dBc (Typ)
• Wide -3dB Bandwidth . . . . . . . . . . . . . . . 850MHz (Typ)
• Very High Slew Rate . . . . . . . . . . . . . . . 2300V/µs (Typ)
• Fast Settling (0.1%) . . . . . . . . . . . . . . . . . . . . 11ns (Typ)
• Excellent Gain Flatness (to 50MHz) . . . . . 0.05dB (Typ)
• High Output Current . . . . . . . . . . . . . . . . . . 65mA (Typ)
• Fast Overdrive Recovery. . . . . . . . . . . . . . . <10ns (Typ)
• Total Gamma Dose. . . . . . . . . . . . . . . . . . 300K RAD (Si)
• Latch Up . . . . . . . . . . . . . . . . . . . None (DI Technology)
Applications
• Video Switching and Routing
• Pulse and Video Amplifiers
• Wideband Amplifiers
• RF/IF Signal Processing
• Flash A/D Driver
• Imaging Systems
The HS-1120RH is a radiation hardened, high speed,
wideband, fast settling current feedback amplifier. These
devices are QML approved and are processed and screened
in full compliance with MIL-PRF-38535. Built with Intersil’
proprietary, complementary bipolar UHF-1 (DI bonded
wafer) process, it is the fastest monolithic amplifier available
from any semiconductor manufacturer.
The HS-1120RH’s wide bandwidth, fast settling
characteristic, and low output impedance, make this
amplifier ideal for driving fast A/D converters. Additionally, it
offers offset voltage nulling capabilities as described in the
“Offset Adjustment” section of this datasheet.
Component and composite video systems will also benefit
from this amplifier’s performance, as indicated by the excel-
lent gain flatness, and 0.03%/0.05 Degree Differential
Gain/Phase specifications (RL = 75Ω).
Detailed electrical specifications are contained in SMD
5962F9675601VPA, available on the Intersil Website or
AnswerFAX systems (document #967560)
A Cross Reference Table is available on the Intersil Website
for conversion of Intersil Part Numbers to SMDs. The address
is (http://www.intersil.com/datasheets/smd/smd_xref.
html). SMD numbers must be used to order Radiation Hard-
ened Products.
Ordering Information
TEMP.
PART NUMBER RANGE (oC) PACKAGE PKG. NO.
5962F9675601VPA -55 to 125 8 Ld CERDIP GDIP1-T8
HFA1100IJ
(Sample)
-40 to 85 8 Ld CERDIP F8.3A
HFA11XXEVAL
Evaluation Board
Pinout
HS-1120RH
MIL-STD-1835, GDIP1-T8
(CERDIP)
TOP VIEW
BAL 1
-IN 2
-
+IN 3
+
V- 4
8 NC
7 V+
6 OUT
5 BAL
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
File Number 4101.1