HM-6617_04 Datasheet, PDF (1/7 Pages) Intersil Corporation – 2K x 8 CMOS PROM

HM-6617/883
June 2004
2K x 8 CMOS PROM
Features
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Low Power Standby and Operating Power
- ICCSB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 100µA
- ICCOP . . . . . . . . . . . . . . . . . . . . . . . . . . 20mA at 1MHz
• Fast Access Time. . . . . . . . . . . . . . . . . . . . . . . . . . 120ns
• Industry Standard Pinout
• Single 5.0V Supply
• CMOS/TTL Compatible Inputs
• High Output Drive . . . . . . . . . . . . . . . . 12 LSTTL Loads
• Synchronous Operation
• On-Chip Address Latches
• Separate Output Enable
• Operating Temperature Range . . . . . . -55^oC to +125^oC
Ordering Information
Description
The HM-6617/883 is a 16,384-bit fuse link CMOS PROM in
a 2K word by 8-bit/word format with “Three-State” outputs.
The HM-6617/883 utilizes a synchronous design technique.
This includes on-chip address latches and a separate output
enable control which makes this device ideal for applications
utilizing recent generation microprocessors. This design
technique, combined with the Intersil advanced self-aligned
silicon gate CMOS process technology offers ultra-low
standby current. Low ICCSB is ideal for battery applications
or other systems with low power requirements.
The Intersil NiCr fuse link technology is utilized on this and
other Intersil CMOS PROMs. This gives the user a PROM
with permanent, stable storage characteristics over the full
industrial and military temperature voltage ranges. NiCr fuse
technology combined with the low power characteristics of
CMOS provides an excellent alternative to standard bipolar
PROMs or NMOS EPROMs.
All bits are manufactured storing a logical “0” and can be
PACKAGE
SBDIP
TEMPERATURE RANGE
-55^oC to +125^oC
120ns
HM1-6617/883
PACKAGE NO.
D24.6
Pinout
HM-6617/883 (SBDIP)
TOP VIEW
A7 1
A6 2
A5 3
A4 4
A3 5
A2 6
A1 7
A0 8
Q0 9
Q1 10
Q2 11
GND 12
24 V_CC
23 A8
22 A9
21 P
20 G
19 A10
18 E
17 Q7
16 Q6
15 Q5
14 Q4
13 Q3
PIN DESCRIPTION
PIN
DESCRIPTION
NC
No Connect
A0-A10
Address Inputs
E
Chip Enable
Q
Data Output
V_CC
Power (+5V)
G
Output Enable
P (Note) Program Enable
NOTE: P should be hardwired to V_CC
except during programming.
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 2001
1
FN3016.3