HIP5600_02 Datasheet, PDF (1/16 Pages) Intersil Corporation – Thermally Protected High Voltage Linear Regulator

HIP5600
®
PPRNAOORCTNEWSESWITOHDBDESRSOIAGLWNENSTE
September 1998 File Number 3270.7
Thermally Protected High Voltage Linear
Regulator
The HIP5600 is an adjustable 3-terminal positive linear
voltage regulator capable of operating up to either 400V_DC
or 280V_RMS. The output voltage is adjustable from 1.2V_DC
to within 50V of the peak input voltage with two external
resistors. This high voltage linear regulator is capable of
sourcing 1mA to 30mA with proper heat sinking. The
HIP5600 can also provide 40mA peak (typical) for short
periods of time.
Protection is provided by the on chip thermal shutdown and
output current limiting circuitry. The HIP5600 has a unique
advantage over other high voltage linear regulators due to its
ability to withstand input to output voltages as high as
400V(peak), a condition that could exist under output short
circuit conditions.
Common linear regulator configurations can be implemented
as well as AC/DC conversion and start-up circuits for switch
mode power supplies.
The HIP5600 requires a minimum output capacitor of 10µF
for stability of the output and may require a 0.02µF input
decoupling capacitor depending on the source impedance. It
also requires a minimum load current of 1mA to maintain
output voltage regulation.
All protection circuitry remains fully functional even if the
adjustment terminal is disconnected. However, if this
happens the output voltage will approach the input voltage.
Features
• Operates from 50V_DC to 400V_DC
• Operates from 50V_RMS to 280V_RMS Line
• UL Recognized
• Variable DC Output Voltage 1.2V_DC to V_IN - 50V
• Internal Thermal Shutdown Protection
• Internal Over Current Protection
• Up to 40mA Peak Output Current
• Surge Rated to ±650V; Meets IEEE/ANSI C62.41.1980
with Additional MOV
CAUTION: This product does not provide isolation from AC
line.
Applications
• Switch Mode Power Supply Start-Up
• Electronically Commutated Motor Housekeeping Supply
• Power Supply for Simple Industrial/Commercial/Consumer
Equipment Controls
• Off-Line (Buck) Switch Mode Power Supply
Ordering Information
PART
NUMBER
HIP5600IS
HIP5600IS2
TEMP. RANGE
-40^oC to +100^oC
-40^oC to +100^oC
PACKAGE
3 Lead Plastic SIP
3 Lead Gullwing Plastic
SIP
Pinouts
HIP5600 (TO-220)
TOP VIEW
TAB ELECTRICALLY
CONNECTED
TO V_OUT
V_OUT
HIP5600
HIP5600 (MO-169)
TOP VIEW
63
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved