HIP5063 Datasheet, PDF (1/4 Pages) Intersil Corporation – Power Control IC Single Chip Power Supply

®
No ^{ROeBcSomOLmEeTnEdePdRROeDpUlaCcTement}
August 1998
HIP5063
File Number 3209.2
Power Control IC Single Chip Power
Supply
The HIP5063 is a complete power control IC, incorporating
both the high power DMOS transistor, CMOS logic and low
level analog circuitry on the same Intelligent Power IC.
This IC allows the user maximum flexibility in implementing
high frequency current controlled power supplies and other
power sources.
Special power transistor current sensing circuitry is
incorporated that minimizes losses due to the monitoring
circuitry. Over-temperature detection circuitry is incorporated
within the IC to monitor the chip temperature.
As a result of the power DMOS transistor’s current and
voltage capability (10A and 60V), power supplies with output
power capability up to 100 watts are possible.
Ordering Information
PART NUMBER
HIP5063DY
HIP5063DW
TEMPERATURE RANGE
0^oC to +85^oC
0^oC to +85^oC
PACKAGE
21 Pad Chip
Wafer
Features
• Single Chip Current Mode Control IC
• 60V, 10A On-chip DMOS Transistor
• Thermal Protection
• 1MHz Operation - External Clock
• Output Rise and Fall Times ~ 3ns
• Simple Implementation of High-Speed Current Mode Con-
trolled Regulators and Power Amplifiers
• Designed for 10V to 45V Operation
Applications
• Single Chip Power Supplies
• Current Mode PWM Applications
• Distributed Power Supplies
• Multiple Output Converters
• Wideband Power Amplifiers for Motor
Control
Chip
V_DDP (21)
(12) V_DDP
NOTE: Unused pads are for trim and test.
122 mils x 126 mils (3.1mm x 3.2mm)
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved