HIP4080 Datasheet, PDF (1/19 Pages) Intersil Corporation – 80V/2.5A Peak, High Frequency Full Bridge FET Driver

HIP4080
December 1996
80V/2.5A Peak, High Frequency
Full Bridge FET Driver
Features
Description
• Drives N-Channel FET Full Bridge Including High Side
Chop Capability
• Bootstrap Supply Max Voltage to 95V_DC
• Drives 1000pF Load at 1MHz in Free Air at 50^oC with
Rise and Fall Times of 10ns (Typ)
• User-Programmable Dead Time
• Charge-Pump and Bootstrap Maintain Upper Bias
Supplies
• DIS (Disable) Pin Pulls Gates Low
• Input Logic Thresholds Compatible with 5V to 15V
Logic Levels
• Very Low Power Consumption
Applications
• Medium/Large Voice Coil Motors
• Full Bridge Power Supplies
• Class D Audio Power Amplifiers
• High Performance Motor Controls
• Noise Cancellation Systems
The HIP4080 is a high frequency, medium voltage Full Bridge
N-Channel FET driver IC, available in 20 lead plastic SOIC and
DIP packages. The HIP4080 includes an input comparator,
used to facilitate the “hysteresis” and PWM modes of operation.
Its HEN (high enable) lead can force current to freewheel in the
bottom two external power MOSFETs, maintaining the upper
power MOSFETs off. Since it can switch at frequencies up to
1MHz, the HIP4080 is well suited for driving Voice Coil Motors,
switching amplifiers in class D high-frequency switching audio
amplifiers and power supplies.
HIP4080 can also drive medium voltage brush motors, and
two HIP4080s can be used to drive high performance step-
per motors, since the short minimum “on-time” can provide
fine micro-stepping capability.
Short propagation delays of approximately 55ns maximizes
control loop crossover frequencies and dead-times which
can be adjusted to near zero to minimize distortion, resulting
in precise control of the driven load.
The similar HIP4081 IC allows independent control of all 4
FETs in an Full Bridge configuration.
See also, Application Note AN9324 for the HIP4080.
Similar part, HIP4080A, includes under voltage circuitry
which doesn’t require the circuitry shown in Figure 30 of this
data sheet.
• Battery Powered Vehicles
• Peripherals
• U.P.S.
Ordering Information
PART
NUMBER
HIP4080IP
HIP4080IB
TEMP.
RANGE (^oC)
-40 to 85
-40 to 85
PACKAGE
20 Lead PDIP
20 Lead SOIC
PKG.
NO.
E20.3
M20.3
Pinout
HIP4080 (PDIP, SOIC)
TOP VIEW
BHB 1
HEN 2
DIS 3
V_SS 4
OUT 5
IN+ 6
IN- ₇
HDEL ₈
LDEL ₉
AHB ₁₀
20 BHO
19 BHS
18 BLO
17 BLS
16 V_DD
15 V_CC
14 ALS
13 ALO
12 AHS
11 ^AHO
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
1
File Number 3178.10