|
HIP2100 Datasheet, PDF (1/12 Pages) Intersil Corporation – 100V/2A Peak, Low Cost, High Frequency Half Bridge Driver | |||
|
®
Data Sheet
April 2, 2010
HIP2100
FN4022.14
100V/2A Peak, Low Cost, High Frequency
Half Bridge Driver
The HIP2100 is a high frequency, 100V Half Bridge
N-Channel power MOSFET driver IC. The low-side and
high-side gate drivers are independently controlled and
matched to 8ns. This gives the user maximum flexibility in
dead-time selection and driver protocol. Undervoltage
protection on both the low-side and high-side supplies force
the outputs low. An on-chip diode eliminates the discrete
diode required with other driver ICs. A new level-shifter
topology yields the low-power benefits of pulsed operation
with the safety of DC operation. Unlike some competitors,
the high-side output returns to its correct state after a
momentary undervoltage of the high-side supply.
Ordering Information
PART
NUMBER
(Note 1)
PART
MARKING
TEMP.
RANGE
(°C)
PKG.
PACKAGE DWG. #
HIP2100IB 2100 IB
-40 to +125 8 Ld SOIC M8.15
HIP2100IBZ 2100 IBZ
(Note 2)
-40 to +125 8 Ld SOIC
(Pb-free)
M8.15
HIP2100EIBZ 2100 EIBZ
(Note 2)
-40 to +125 8 Ld EPSOIC M8.15C
(Pb-free)
HIP2100IRZ HIP 2100IRZ -40 to +125 16 Ld 5x5 QFN L16.5x5
(Note 2)
(Pb-free)
HIP2100IR4Z 21 00IR4Z
(Note 2)
-40 to +125 12 Ld 4x4 DFN L12.4x4A
(Pb-free)
NOTES:
1. Add â-Tâ suffix for tape and reel. Please refer to TB347 for details on
reel specifications.
2. These Intersil Pb-free plastic packaged products employ special Pb-
free material sets, molding compounds/die attach materials, and
100% matte tin plate plus anneal (e3 termination finish, which is
RoHS compliant and compatible with both SnPb and Pb-free
soldering operations). Intersil Pb-free products are MSL classified
at Pb-free peak reflow temperatures that meet or exceed the Pb-
free requirements of IPC/JEDEC J STD-020.
Features
⢠Drives N-Channel MOSFET Half Bridge
⢠SOIC, EPSOIC, QFN and DFN Package Options
⢠SOIC, EPSOIC and DFN Packages Compliant with 100V
Conductor Spacing Guidelines of IPC-2221
⢠Pb-Free Product Available (RoHS Compliant)
⢠Bootstrap Supply Max Voltage to 114VDC
⢠On-Chip 1Ω Bootstrap Diode
⢠Fast Propagation Times for Multi-MHz Circuits
⢠Drives 1000pF Load with Rise and Fall Times Typ. 10ns
⢠CMOS Input Thresholds for Improved Noise Immunity
⢠Independent Inputs for Non-Half Bridge Topologies
⢠No Start-Up Problems
⢠Outputs Unaffected by Supply Glitches, HS Ringing Below
Ground, or HS Slewing at High dv/dt
⢠Low Power Consumption
⢠Wide Supply Range
⢠Supply Undervoltage Protection
⢠3Ω Driver Output Resistance
⢠QFN/DFN Package:
- Compliant to JEDEC PUB95 MO-220
QFN - Quad Flat No Leads - Package Outline
- Near Chip Scale Package Footprint, which Improves
PCB Efficiency and has a Thinner Profile
Applications
⢠Telecom Half Bridge Power Supplies
⢠Avionics DC/DC Converters
⢠Two-Switch Forward Converters
⢠Active Clamp Forward Converters
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004, 2010. All Rights Reserved.
All other trademarks mentioned are the property of their respective owners.
|
▷ |