English
Language : 

HI-539_03 Datasheet, PDF (1/12 Pages) Intersil Corporation – Precision, 4-Channel, Low-Level, Differential Multiplexer
®
Data Sheet
August 2003
HI-539
FN3149.3
Precision, 4-Channel, Low-Level,
Differential Multiplexer
The Intersil HI-539 is a monolithic, 4-Channel, differential
multiplexer. Two digital inputs are provided for channel
selection, plus an Enable input to disconnect all channels.
Performance is guaranteed for each channel over the
voltage range ±10V, but is optimized for low level differential
signals. Leakage current, for example, which varies slightly
with input voltage, has its distribution centered at zero input
volts.
In most monolithic multiplexers, the net differential offset due
to thermal effects becomes significant for low level signals.
This problem is minimized in the HI-539 by symmetrical
placement of critical circuitry with respect to the few heat
producing devices.
Supply voltages are ±15V and power consumption is only
2.5mW.
Ordering Information
PART NUMBER
HI1-0539-5
TEMP.
RANGE (oC)
PACKAGE
0 to 75 16 Ld CERDIP
PKG.
DWG. #
F16.3
Pinouts
HI-539
(CERDIP)
TOP VIEW
A0 1
EN 2
V- 3
IN 1A 4
IN 2A 5
IN 3A 6
IN 4A 7
OUT A 8
16 A1
15 GND
14 V+
13 IN 1B
12 IN 2B
11 IN 3B
10 IN 4B
9 OUT B
Features
• Differential Performance, Typical:
- Low ∆rON, 125oC . . . . . . . . . . . . . . . . . . . . . . . . . . 5.5Ω
- Low ∆ID(ON), 125oC. . . . . . . . . . . . . . . . . . . . . . . 0.6nA
- Low ∆ Charge Injection . . . . . . . . . . . . . . . . . . . . 0.1pC
- Low Crosstalk . . . . . . . . . . . . . . . . . . . . . . . . . . . -124dB
• Settling Time, ±0.01% . . . . . . . . . . . . . . . . . . . . . . . 900ns
• Wide Supply Range . . . . . . . . . . . . . . . . . . . ±5V to ±18V
• Break-Before-Make Switching
• No Latch-Up
Applications
• Low Level Data Acquisition
• Precision Instrumentation
• Test Systems
TRUTH TABLE
ON CHANNEL TO
EN
A1
A0
OUT A
OUT B
L
X
X
None
None
H
L
L
1A
1B
H
L
H
2A
2B
H
H
L
3A
3B
H
H
H
4A
4B
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.