HI-390 Datasheet, PDF (1/7 Pages) Intersil Corporation – CMOS Analog Switch

Data Sheet
HI-390
July 1999
File Number 4754
CMOS Analog Switch
The Hl-390 switch is a monolithic device fabricated using
CMOS technology and the Intersil dielectric isolation process.
This device is TTL compatible and features low leakage and
supply currents, low and nearly constant ON resistance over
the analog signal range, break-before-make switching and
low power dissipation.
Ordering Information
PART
NUMBER
TEMP. RANGE
(^oC)
PACKAGE
HI1-0390-2
HI3-0390-5
-55 to 125
0 to 75
16 Ld CERDIP
16 Ld PDIP
PKG. NO.
F16.3
E16.3
Pinout Switch States shown for a Logic “1” Input
DUAL SPDT HI-390 (CERDIP, PDIP)
TOP VIEW
D₁ 1
NC 2
D₃ 3
S₃ 4
S₄ 5
D₄ 6
NC 7
D₂ 8
16 S₁
15 IN₁
14 V-
13 GND
12 NC
11 V+
10 IN₂
9 S₂
LOGIC
0
1
SW1, SW2
OFF
ON
SW3, SW4
ON
OFF
Features
• Analog Signal Range (±15V Supplies) . . . . . . . . . . . ±15V
• Low Leakage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40pA
• Low On Resistance . . . . . . . . . . . . . . . . . . . . . . . . . . 35Ω
• Break-Before-Make Delay . . . . . . . . . . . . . . . . . . . . 60ns
• Charge Injection . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30pC
• TTL Compatible
• Symmetrical Switch Elements
• Low Operating Power . . . . . . . . . . . . . . . . . . . . . . . 1.0mW
Applications
• Sample and Hold (i.e., Low Leakage Switching)
• Op Amp Gain Switching (i.e., Low On Resistance)
• Portable, Battery Operated Circuits
• Low Level Switching Circuits
• Dual or Single Supply Systems
Functional Diagram
S
IN
N
P
D
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999