HI-201HS_04 Datasheet, PDF (1/11 Pages) Intersil Corporation – High Speed, Quad SPST, CMOS Analog Switch

®
Data Sheet
September 2004
HI-201HS
FN3123.4
High Speed, Quad SPST, CMOS Analog
Switch
The HI-201HS is a monolithic CMOS Analog Switch
featuring very fast switching speeds and low ON resistance.
The integrated circuit consists of four independently
selectable SPST switches and is pin compatible with the
industry standard HI-201 switch.
Fabricated using silicon-gate technology and the Intersil
Dielectric Isolation process, this TTL compatible device offers
improved performance over previously available CMOS analog
switches. Featuring maximum switching times of 50ns, low ON
resistance of 50Ω maximum, and a wide analog signal range, the
HI-201HS is designed for any application where improved
switching performance, particularly switching speed, is required.
(A more detailed discussion on the design and application of the
HI-201HS can be found in Application Note AN543.)
Ordering Information
TEMP.
PART NUMBER RANGE (°C)
PACKAGE
PKG.
DWG. #
HI1-0201HS-2
-55 to 125 16 Ld CERDIP
F16.3
HI1-0201HS-4
-25 to 85 16 Ld CERDIP
F16.3
HI1-0201HS-5
0 to 75 16 Ld CERDIP
F16.3
HI3-0201HS-5
0 to 75 16 Ld PDIP
E16.3
HI3-0201HS-5Z
(See Note)
0 to 75
16 Ld PDIP
(Pb-free)
E16.3
HI9P0201HS-5
0 to 75 16 Ld SOIC
M16.3
HI9P0201HS-5Z
(See Note)
0 to 75
16 Ld SOIC
(Pb-free)
M16.3
HI9P0201HS-9
-40 to 85 16 Ld SOIC
M16.3
HI9P0201HS-9Z
(See Note)
-40 to 85 16 Ld SOIC
(Pb-free)
M16.3
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020C.
Features
• Pb-free Available as an Option
• Fast Switching Times
- t_ON . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30ns
- t_OFF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40ns
• Low “ON” Resistance . . . . . . . . . . . . . . . . . . . . . . . . 30Ω
• Pin Compatible with Standard HI-201
• Wide Analog Voltage Range (±15V Supplies) . . . . . . . ±15V
• Low Charge Injection (±15V Supplies) . . . . . . . . . . 10pC
• TTL Compatible
• Symmetrical Switching Analog Current Range . . . . . 80mA
Applications
• High Speed Multiplexing
• High Frequency Analog Switching
• Sample and Hold Circuits
• Digital Filters
• Operational Amplifier Gain Switching Networks
• Integrator Reset Circuits
Pinout (Switches Shown For Logic “1” Input)
HI-201HS (CERDIP, PDIP, SOIC)
TOP VIEW
A₁ 1
OUT1 2
IN1 3
V- 4
GND 5
IN4 6
OUT4 7
A₄ 8
16 A₂
15 OUT2
14 IN2
13 V+
12 NC
11 IN3
10 OUT3
9 A₃
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2000, 2004. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.