HFA1109 Datasheet, PDF (1/12 Pages) Intersil Corporation – 450MHz, Low Power, Current Feedback Video Operational Amplifier

HFA1109
March 1997
450MHz, Low Power, Current Feedback
Video Operational Amplifier
Features
Description
• Wide - 3dB Bandwidth (A_V = +2) . . . . . . . . . . . . 450MHz
• Gain Flatness (To 250MHz) . . . . . . . . . . . . . . . . . . 0.8dB
• Very Fast Slew Rate (A_V = +2) . . . . . . . . . . . . . 1100V/µs
• High Input Impedance . . . . . . . . . . . . . . . . . . . . . 1.7MΩ
• Differential Gain/Phase . . . . . . . . . 0.02%/0.02 Degrees
• Low Supply Current . . . . . . . . . . . . . . . . . . . . . . . 10mA
Applications
• Professional Video Processing
• Video Switchers and Routers
The HFA1109 is a high speed, low power, current feedback
amplifier built with Intersil’s proprietary complementary bipo-
lar UHF-1 process. This amplifier features a unique combi-
nation of power and performance specifically tailored for
video applications.
The HFA1109 is a standard pinout op amp. It is a higher
performance, drop-in replacement (no feedback resistor
change required) for the CLC409.
If a comparably performing op amp with an output disable
function (useful for video multiplexing) is required, please
refer to the HFA1149 data sheet.
Ordering Information
• Medical Imaging
• PC Multimedia Systems
• Video Distribution Amplifiers
• Flash Converter Drivers
• Radar/IF Processing
PART NUMBER
(BRAND)
HFA1109IP
HFA1109IB (H1109)
HFA11XXEVAL
TEMP.
RANGE (^oC) PACKAGE
PKG.
NO.
-40 to 85 8 Ld PDIP
E8.3
-40 to 85 8 Ld SOIC
M8.15
DIP Evaluation Board for High Speed
Op Amps
Pinout
HFA1109
(PDIP, SOIC)
TOP VIEW
NC 1
-IN 2 _-
+
+IN 3
V- 4
8 NC
7 V+
6 OUT
5 NC
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
File Number 4019.3