HCTS299MS_02 Datasheet, PDF (1/12 Pages) Intersil Corporation – Radiation Hardened 8-Bit Universal Shift Register; Three-State

TM
HCTS299MS
August 1995
Radiation Hardened
8-Bit Universal Shift Register; Three-State
Features
Pinouts
• 3 Micron Radiation Hardened CMOS SOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
-Bus Driver Outputs: 15 LSTTL Loads
• Military Temperature Range: -55^oC to +125^oC
20 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T20
TOP VIEW
S0 1
OE1 2
OE2 3
I/O6 4
I/O4 5
I/O2 6
I/O0 7
20 VCC
19 S1
18 DS7
17 Q7
16 I/O7
15 I/O5
14 I/O3
• Significant Power Reduction Compared to LSTTL ICs
Q0 8
13 I/O1
• DC Operating Voltage Range: 4.5V to 5.5V
MR 9
12 CP
• LSTTL Input Compatibility
-VIL = 0.8V Max
-VIH = VCC/2 Min
GND 10
11 DS0
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
The Intersil HCTS299MS is a Radiation Hardened 8-bit shift/
storage register with three-state bus interface capability. The
20 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F20
TOP VIEW
register has four synchronous operating modes controlled by
S0
1
20
VCC
the two select inputs (S0, S1). The mode select, the serial
OE1
2
19
S1
data (DS0, DS7) and the parallel data (IO0 - IO7) respond
OE2
3
18
DS7
only to the low to high transition of the clock (CP) pulse. S0,
I/O6
4
17
Q7
S1 and the data inputs must be one set up time period prior
I/O4
to the clocks positive transition. The master reset (MR) is an
I/O2
asynchronous active low input.
I/O0
The HCTS299MS utilizes advanced CMOS/SOS technology
Q0
to achieve high-speed operation. This device is a member of
MR
radiation hardened, high-speed, CMOS/SOS Logic Family
GND
with TTL input compatibility.
5
16
6
15
7
14
8
13
9
12
10
11
I/O7
I/O5
I/O3
I/O1
CP
DS0
Ordering Information
PART NUMBER
HCTS299DMSR
HCTS299KMSR
HCTS299D/Sample
HCTS299K/Sample
HCTS299HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
20 Lead SBDIP
20 Lead Ceramic Flatpack
20 Lead SBDIP
20 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
624
Spec Number 518640
FN3069.1