HCTS109MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened Dual JK Flip Flop

HCTS109MS
September 1995
Radiation Hardened
Dual JK Flip Flop
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16, LEAD FINISH C
TOP VIEW
RI 1
J1 2
K1 3
CP1 4
S1 5
Q1 6
Q1 7
GND 8
16 VCC
15 R2
14 J2
13 K2
12 CP2
11 S2
10 Q2
9 Q2
• DC Operating Voltage Range: 4.5V to 5.5V
• LSTTL Input Logic Compatibility
- VIL = 0.8V Max
- VIH = VCC/2 Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16, LEAD FINISH C
TOP VIEW
Description
R1
1
16
VCC
J1
The Intersil HCTS109MS is a Radiation Hardened Dual JK
Flip Flop with set and reset. The flip flop changes state with
K1
2
15
R2
3
14
J2
the positive transition of the clock (CP1 or CP2).
CP1
4
13
K2
S1
The HCTS109MS utilizes advanced CMOS/SOS technology
to achieve high-speed operation. This device is a member of
Q1
radiation hardened, high-speed, CMOS/SOS Logic Family.
Q1
5
12
CP2
6
11
S2
7
10
Q2
GND
The HCTS109MS is supplied in a 16 lead Ceramic flatpack
8
9
Q2
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCTS109DMSR
HCTS109KMSR
HCTS109D/Sample
HCTS109K/Sample
HCTS109HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
10
Spec Number 518601
File Number 2141.2