HCS244MS Datasheet, PDF (1/10 Pages) Intersil Corporation – Radiation Hardened Octal Buffer/Line Driver, Three-State

HCS244MS
September 1995
Radiation Hardened
Octal Buffer/Line Driver, Three-State
Features
• 3 Micron Radiation Hardened CMOS SOS
• Total Dose 200K RAD (Si)/s
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/
Bit-Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Latch-Up Free Under Any Conditions
• Fanout (Over Temperature Range)
- Bus Driver Outputs - 15 LSTTL Loads
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 0.3 VCC Max
- VIH = 0.7 VCC Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
The Intersil HCS244MS is a Radiation Hardened Non-
Inverting Octal Buffer/Line Driver, Three-State, with two
active-low output enables.
The HCS244MS utilizes advanced CMOS/SOS technology
to achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCS244MS is supplied in a 20 lead Ceramic flatpack (K
suffix) or a SBDIP Package (D suffix).
Pinouts
20 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T20
TOP VIEW
OE 1 ¹
A0 1 2
Y3 2 3
A1 1 4
Y2 2 5
A2 1 6
Y1 2 7
A3 1 8
Y0 2 9
GND 10
20 VCC
19 2 OE
18 1 Y0
17 2 A3
16 1 Y1
15 2 A2
14 1 Y2
13 2 A1
12 _{1 Y3}
11 2 A0
OE 1
A0 1
Y3 2
A1 1
Y2 2
A2 1
Y1 2
A3 1
Y0 2
GND
20 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F20
TOP VIEW
1
20
2
19
3
18
4
17
5
16
6
15
7
14
8
13
9
12
10
11
VCC
2 OE
1 Y0
2 A3
1 Y1
2 A2
1 Y2
2 A1
1 Y3
2 A0
Ordering Information
PART NUMBER
HCS244DMSR
HCS244KMSR
HCS244D/Sample
HCS244K/Sample
HCS244HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
20 Lead SBDIP
20 Lead Ceramic Flatpack
20 Lead SBDIP
20 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
312
Spec Number 518763
File Number 2132.2