HCS161MS Datasheet, PDF (1/9 Pages) Intersil Corporation – Radiation Hardened Synchronous Counter

HCS161MS
September 1995
Radiation Hardened
Synchronous Counter
Features
Pinouts
• 3 Micron Radiation Hardened SOS CMOS
• Total Dose 200K RAD (Si)
• SEP Effective LET No Upsets: >100 MEV-cm²/mg
• Single Event Upset (SEU) Immunity < 2 x 10^-9 Errors/Bit-
Day (Typ)
• Dose Rate Survivability: >1 x 10¹² RAD (Si)/s
• Dose Rate Upset >10¹⁰ RAD (Si)/s 20ns Pulse
• Cosmic Ray Upset Immunity 2 x 10^-9 Error/Bit Day (Typ)
• Latch-Up Free Under Any Conditions
• Military Temperature Range: -55^oC to +125^oC
• Significant Power Reduction Compared to LSTTL ICs
• DC Operating Voltage Range: 4.5V to 5.5V
• Input Logic Levels
- VIL = 0.3 VCC Max
- VIH = 0.7 VCC Min
• Input Current Levels Ii ≤ 5µA at VOL, VOH
Description
16 LEAD CERAMIC DUAL-IN-LINE
METAL SEAL PACKAGE (SBDIP)
MIL-STD-1835 CDIP2-T16
TOP VIEW
MR 1
CP 2
P0 3
P1 4
P2 5
P3 6
PE 7
GND 8
16 VCC
15 TC
14 Q0
13 Q1
12 Q2
11 Q3
10 TE
9 SPEN
16 LEAD CERAMIC METAL SEAL
FLATPACK PACKAGE (FLATPACK)
MIL-STD-1835 CDFP4-F16
TOP VIEW
The Intersil HCS161MS is a Radiation Hardened 4-Input Binary; ^MR
1
16
VCC
synchronous counter featuring asynchronous reset and look-
CP
2
15
TC
ahead carry logic. The HCS161 has an active-low master reset to
P0
3
14
Q0
zero, MR. A low level at the synchronous parallel enable, SPE,
P1
4
13
Q1
disables counting and allows data at the preset inputs (p0 - p3) to
P2
load the counter. The data is latched to the outputs on the posi-
5
12
Q2
tive edge of the clock input, CP. The HCS161MS has two count
P3
6
11
Q3
output, IC. The terminal count output indicates a maximum count
PE
7
10
TE
for one clock pulse and is used to enable the next cascaded ^GND
8
9
SPE
stage to count.
The HCS161MS utilizes advanced CMOS/SOS technology to
achieve high-speed operation. This device is a member of
radiation hardened, high-speed, CMOS/SOS Logic Family.
The HCS161MS is supplied in a 16 lead Ceramic flatpack
(K suffix) or a SBDIP Package (D suffix).
Ordering Information
PART NUMBER
HCS161DMSR
HCS161KMSR
HCS161D/Sample
HCS161K/Sample
HCS161HMSR
TEMPERATURE RANGE
-55^oC to +125^oC
-55^oC to +125^oC
+25^oC
+25^oC
+25^oC
SCREENING LEVEL
Intersil Class S Equivalent
Intersil Class S Equivalent
Sample
Sample
Die
PACKAGE
16 Lead SBDIP
16 Lead Ceramic Flatpack
16 Lead SBDIP
16 Lead Ceramic Flatpack
Die
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
193
Spec Number 518755
File Number 2469.2