HC5515 Datasheet, PDF (1/17 Pages) Intersil Corporation – ITU CO/PABX SLIC with Low Power Standby

Data Sheet
HC5515
October 1998
File Number 4235.4
ITU CO/PABX SLIC with Low Power
Standby
The HC5515 is a subscriber line interface circuit which is
interchangeable with Ericsson’s PBL3860 for distributed
central office applications. Enhancements include immunity
to circuit latch-up during hot plug and absence of false
signaling in the presence of longitudinal currents.
The HC5515 is fabricated in a High Voltage Dielectrically
Isolated (DI) Bipolar Process that eliminates leakage
currents and device latch-up problems normally associated
with junction isolated ICs. The elimination of the leakage
currents results in improved circuit performance for wide
temperature extremes. The latch free benefit of the DI
process guarantees operation under adverse transient
conditions. This process feature makes the HC5515 ideally
suited for use in harsh outdoor environments.
Ordering Information
PART NUMBER
HC5515CM
HC5515CP
HC5515IM
HC5515IP
TEMP.
RANGE (^oC)
PACKAGE
0 to 70 28 Ld PLCC
0 to 70 22 Ld PDIP
-40 to 85 28 Ld PLCC
-40 to 85 22 Ld PDIP
PKG.
NO.
N28.45
E22.4
N28.45
E22.4
Features
• DI Monolithic High Voltage Process
• Programmable Current Feed (20mA to 60mA)
• Programmable Loop Current Detector Threshold and
Battery Feed Characteristics
• Ring Trip Detection
• Compatible with Ericsson’s PBL3860
• Thermal Shutdown
• On-Hook Transmission
• Wide Battery Voltage Range (-24V to -58V)
• Low Standby Power
• -40^oC to 85^oC Ambient Temperature Range
Applications
• Digital Loop Carrier Systems
• Fiber-In-The-Loop ONUs
• Wireless Local Loop
• Hybrid Fiber Coax
• Pair Gain
• POTS
• PABX
• Related Literature
- AN9632, Operation of the HC5523/15 Evaluation Board
Block Diagram
RINGRLY
DT
DR
TIP
RING
HPT
HPR
RING RELAY
DRIVER
RING TRIP
DETECTOR
2-WIRE
INTERFACE
V_BAT
V_CC
V_EE
AGND
BGND
BIAS
LOOP CURRENT
DETECTOR
4-WIRE
INTERFACE
VF SIGNAL
PATH
DIGITAL
MULTIPLEXER
V_TX
RSN
E0
C1
C2
DET
R_D
R_DC
RSG
55
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999