HA5022 Datasheet, PDF (1/16 Pages) Intersil Corporation – Dual, 125MHz, Video Current Feedback Amplifier with Disable

Data Sheet
HA5022
May 1999 File Number 3392.6
Dual, 125MHz, Video Current Feedback
Amplifier with Disable
The HA5022 is a dual version of the popular Intersil HA5020.
It features wide bandwidth and high slew rate, and is
optimized for video applications and gains between 1 and
10. It is a current feedback amplifier and thus yields less
bandwidth degradation at high closed loop gains than
voltage feedback amplifiers.
The low differential gain and phase, 0.1dB gain flatness, and
ability to drive two back terminated 75Ω cables, make this
amplifier ideal for demanding video applications.
The HA5022 also features a disable function that
significantly reduces supply current while forcing the output
to a true high impedance state. This functionality allows 2:1
video multiplexers to be implemented with a single IC.
The current feedback design allows the user to take
advantage of the amplifier’s bandwidth dependency on the
feedback resistor. By reducing R_F, the bandwidth can be
increased to compensate for decreases at higher closed
loop gains or heavy output loads.
Ordering Information
PART NUMBER
HA5022IP
HA5022IB
TEMP.
RANGE (^oC)
PACKAGE
-40 to 85 16 Ld PDIP
-40 to 85 16 Ld SOIC
PKG.
NO.
E16.3
M16.15
HA5022EVAL
High Speed Op Amp DIP Evaluation Board
Features
• Dual Version of HA-5020
• Individual Output Enable/Disable
• Input Offset Voltage . . . . . . . . . . . . . . . . . . . . . . . . 800µV
• Wide Unity Gain Bandwidth . . . . . . . . . . . . . . . . . 125MHz
• Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 475V/µs
• Differential Gain . . . . . . . . . . . . . . . . . . . . . . . . . . . 0.03%
• Differential Phase . . . . . . . . . . . . . . . . . . . . 0.03 Degrees
• Supply Current (per Amplifier) . . . . . . . . . . . . . . . . 7.5mA
• ESD Protection. . . . . . . . . . . . . . . . . . . . . . . . . . . . 4000V
• Guaranteed Specifications at ±5V Supplies
Applications
• Video Multiplexers; Video Switching and Routing
• Video Gain Block
• Video Distribution Amplifier/RGB Amplifier
• Flash A/D Driver
• Current to Voltage Converter
• Medical Imaging
• Radar and Imaging Systems
Pinout
HA5022
(PDIP, SOIC)
TOP VIEW
-IN1 1
-
+
+IN1 2
DIS1 3
V- 4
DIS2 5
+IN2 6
+_-
-IN2 7
NC 8
16 OUT1
15 NC
14 NC
13 V+
12 NC
11 NC
10 OUT2
9 NC
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999