HA-5104883 Datasheet, PDF (1/5 Pages) Intersil Corporation – Low Noise, High Performance, Quad Operational Amplifier

®
HA-5104/883
April 2002
Low Noise, High Performance,
Quad Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Low Input Noise Voltage Density at 1kHz . 6nV/√Hz (Max)
4.3nV/√Hz (Typ)
• Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . .1V/µs (Min)
3V/µs (Typ)
• Unity Gain Bandwidth . . . . . . . . . . . . . . . . . 8MHz (Typ)
• High Open Loop Gain (Full Temp) . . . . . 100kV/V (Min)
250kV/V (Typ)
• High CMRR, PSRR (Full Temp). . . . . . . . . . . 86dB (Min)
100dB
(Typ)
• Low Offset Voltage Drift . . . . . . . . . . . . . . 3µV/^oC (Typ)
• No Crossover Distortion
• Standard Quad Pinout
Low noise and high performance are key words describing
the unity gain stable HA-5104/883. This general purpose
quad amplifier offers an array of dynamic specifications
including 1V/µs slew rate (min), and 8MHz bandwidth (typ).
Complementing these outstanding parameters are very low
noise specifications of 4.3nV/√Hz at 1kHz (typ) or 6nV/√Hz
(max).
Fabricated using the Intersil standard high frequency D.I.
process, these operational amplifiers also offer excellent
input specifications such as 2.5mV (max) offset voltage and
75nA (max) offset current. Complementing these specifica-
tions are 100dB (min) open loop gain and 55dB channel sep-
aration (min). Economically, the HA-5104/883 also
consumes a very moderate amount of power (225mW per
package) while also saving board space and cost.
This impressive combination of features make this amplifier
ideally suited for designs ranging from audio amplifiers and
active filters to the most demanding signal conditioning and
instrumentation circuits.
Applications
• High Q Active Filters
• Audio Amplifiers
• Integrators
• Signal Generators
• Instrumentation Amplifiers
Ordering Information
PART
NUMBER
HA1-5104/883
TEMPERATURE
RANGE
-55^oC to +125^oC
PACKAGE
14 Lead CerDIP
Pinout
HA-5104/883
(CERDIP)
TOP VIEW
OUT 1 1
-IN1 2
-1
+
+IN1 ³
V+ 4
+IN2 5
+
-
2
-IN2 6
OUT 2 7
14 OUT 4
4
-
+
13 -IN4
12 +IN4
11 V-
10 +IN3
3
+
-
9 -IN3
8 _{OUT 3}
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
1
Spec Number 511014-883
FN3710.1