|
HA-5104 Datasheet, PDF (1/5 Pages) Intersil Corporation – Low Noise, High Performance, Quad Operational Amplifier | |||
|
HA-5104/883
July 1994
Low Noise, High Performance,
Quad Operational Ampliï¬er
Features
Description
⢠This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
⢠Low Input Noise Voltage Density at 1kHz. . 6nV/âHz (Max)
4.3nV/âHz (Typ)
⢠Slew Rate . . . . . . . . . . . . . . . . . . . . . . . . . . . 1V/µs (Min)
3V/µs (Typ)
⢠Unity Gain Bandwidth . . . . . . . . . . . . . . . . . 8MHz (Typ)
⢠High Open Loop Gain (Full Temp) . . . . . 100kV/V (Min)
250kV/V (Typ)
⢠High CMRR, PSRR (Full Temp) . . . . . . . . . . . 86dB (Min)
100dB (Typ)
⢠Low Offset Voltage Drift . . . . . . . . . . . . . . 3µV/oC (Typ)
⢠No Crossover Distortion
⢠Standard Quad Pinout
Applications
⢠High Q Active Filters
Low noise and high performance are key words describing
the unity gain stable HA-5104/883. This general purpose
quad ampliï¬er offers an array of dynamic speciï¬cations
including 1V/µs slew rate (min), and 8MHz bandwidth (typ).
Complementing these outstanding parameters are very low
noise speciï¬cations of 4.3nV/âHz at 1kHz (typ) or 6nV/âHz
(max).
Fabricated using the Intersil standard high frequency D.I.
process, these operational ampliï¬ers also offer excellent
input speciï¬cations such as 2.5mV (max) offset voltage and
75nA (max) offset current. Complementing these speciï¬ca-
tions are 100dB (min) open loop gain and 55dB channel
separation (min). Economically, the HA-5104/883 also con-
sumes a very moderate amount of power (225mW per pack-
age) while also saving board space and cost.
This impressive combination of features make this ampliï¬er
ideally suited for designs ranging from audio ampliï¬ers and
active ï¬lters to the most demanding signal conditioning and
instrumentation circuits.
Ordering Information
⢠Audio Ampliï¬ers
⢠Integrators
⢠Signal Generators
⢠Instrumentation Ampliï¬ers
PART
NUMBER
HA1-5104/883
HA4-5104/883
TEMPERATURE
RANGE
-55oC to +125oC
-55oC to +125oC
PACKAGE
14 Lead CerDIP
20 Lead Ceramic LCC
Pinouts
HA-5104/883
(CERDIP)
TOP VIEW
OUT 1 1
-IN1 2
-1
+
+IN1 3
V+ 4
+IN2 5
+
-
2
-IN2 6
OUT 2 7
14 OUT 4
4
-
+
13 -IN4
12 +IN4
11 V-
10 +IN3
3
+
-
9 -IN3
8 OUT 3
HA-5104/883
(CLCC)
TOP VIEW
3 2 1 20 19
+IN1 4
+-
NC 5 1
18 +IN4
-+
4 17 NC
V+ 6
16 V-
NC 7 +2 -
+IN2 8
- 3+ 15 NC
14 +IN3
9 10 11 12 13
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
http://www.intersil.com or 407-727-9207 | Copyright © Intersil Corporation 1999
3-114
Spec Number 511014-883
File Number 3710
|
▷ |