HA-5102883 Datasheet, PDF (1/5 Pages) Intersil Corporation – Dual, Low Noise, High Performance Operational Amplifier

TM
HA-5102/883
July 1994
Dual, Low Noise, High Performance
Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Low Input Noise Voltage Density at 1kHz . 6nV/√Hz (Max)
4.3nV/√Hz (Typ)
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . . .1V/µs (Min)
3V/µs (Typ)
• Unity Gain Bandwidth . . . . . . . . . . . . . . . . . 8MHz (Typ)
• High Open Loop Gain (Full Temp) . . . . . 100kV/V (Min)
250kV/V (Typ)
• High CMRR, PSRR (Full Temp). . . . . . . . . . . 86dB (Min)
100dB
(Typ)
• Low Offset Voltage Drift . . . . . . . . . . . . . . 3µV/^oC (Typ)
• No Crossover Distortion
• Standard Dual Pinout
Low noise and high performance are key words describing
the unity gain stable HA-5102/883. This general purpose
dual amplifier offers an array of dynamic specifications
including 1V/µs slew rate (min), A_VCL ≥ 1, and 8MHz band-
width (typ). Complementing these outstanding parameters is
a very low noise specification of 4.3nV/√Hz at 1kHz (typ),
6nV/√Hz (max).
Fabricated using the Intersil standard high frequency D.I.
process, these operational amplifiers also offer excellent
input specifications such as 2.5mV (max) offset voltage and
75nA (max) offset current. Complementing these specifica-
tions are 100dB (min) open loop gain and 60dB channel sep-
aration (min). Economically, the HA-5102/883 also
consumes a very moderate amount of supply power
180mW/ package.
This impressive combination of features make this amplifier
ideally suited for designs ranging from audio amplifiers and
active filters to the most demanding signal conditioning and
instrumentation circuits.
Applications
• High Quality Audio Preamplifiers
• High Q Active Filters
• Low Noise Function Generators
• Low Distortion Oscillators
• Low Noise Comparators
Ordering Information
PART
NUMBER
HA2-5102/883
HA4-5102/883
HA7-5102/883
TEMPERATURE
RANGE
-55^oC to +125^oC
-55^oC to +125^oC
-55^oC to +125^oC
PACKAGE
8 Pin Can
20 Lead Ceramic LCC
8 Lead CerDIP
Pinouts
HA-5102/883
(CERDIP)
TOP VIEW
OUT1 ₁
-IN1 ₂
1
-
+IN1 ₃ +
V- ₄
8 V+
7 OUT2
6 -IN2
2
-
+ _{5 +IN2}
HA-5102/883
(CLCC)
TOP VIEW
NC ⁴
-IN1 5
NC 6
+IN1 7
NC 8
3 2 1 20 19
1
-+
2
+-
18 NC
17 OUT2
16 NC
15 -IN2
14 NC
9 10 11 12 13
HA-5102/883
(METAL CAN)
TOP VIEW
V+
OUT1
-IN1 2
8
1
7 OUT2
12
-+
+-
6 -IN2
+IN1 3
5 +IN2
4
V-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002. All Rights Reserved
109
Spec Number 511019-883
FN3709