HA-5002883 Datasheet, PDF (1/6 Pages) Intersil Corporation – Monolithic, Wideband, High Slew Rate, High Output Current Buffer

®
HA-5002/883
October 26, 2004
Monolithic, Wideband, High Slew Rate,
High Output Current Buffer
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Voltage Gain (R_L = 1kΩ). . . . . . . . . . . . . . . . . . 0.98 (Min)
0.995 (Typ)
(R_L = 100Ω) . . . . . . . . . . . . . . . . 0.96 (Min)
0.971 (Typ)
The HA-5002/883 is a monolithic, wideband, high slew rate,
high output current, buffer amplifier.
Utilizing the advantages of the Harris Dielectric Isolation tech-
nologies, the HA-5002/883 current buffer offers 1300V/µs
slew rate typically and 1000V/µs minimum with 110MHz of
bandwidth. The ±100mA minimum output current capability is
enhanced by a 3Ω output impedance.
• High Input Impedance . . . . . . . . . . . . . . . . . 1.5MΩ (Min)
3MΩ (Typ)
• Low Output Impedance . . . . . . . . . . . . . . . . . . 5Ω (Max)
3Ω (Typ)
• Very High Slew Rate . . . . . . . . . . . . . . . .1000V/µs (Min)
1300V/µs (Typ)
• Wide Small Signal Bandwidth. . . . . . . . . .110MHz (Typ)
• High Output Current . . . . . . . . . . . . . . . . . 100mA (Min)
• High Pulsed Output Current . . . . . . . . . . . 400mA (Max)
The monolithic HA-5002/883 will replace the hybrid LH0002
with corresponding performance increases. These charac-
teristics range from the 3MΩ (typ) input impedance to the
increased output voltage swing. Monolithic design technolo-
gies have allowed a more precise buffer to be developed
with more than an order of magnitude smaller gain error. The
voltage gain is 0.98 guaranteed minimum with a 1kΩ load
and 0.96 minimum with a 100Ω load.
The HA-5002/883 will provide many present hybrid users
with a higher degree of reliability and at the same time
increase overall circuit performance.
• Monolithic Dielectric Isolation Construction
• Replaces Hybrid LH0002
Ordering Information
Applications
• Line Driver
• Data Acquisition
• 110MHz Buffer
• High Power Current Booster
• High Power Current Source
• Sample and Holds
• Radar Cable Driver
• Video Products
PART
NUMBER
HA4-5002/883
TEMPERATURE
RANGE
-55^oC to +125^oC
PACKAGE
20 Lead Ceramic LCC
Pinout
HA-5002/883 (CLCC)
TOP VIEW
3 2 1 20 19
NC 4
18 NC
V₂- 5
17 V₂+
NC 6
16 NC
NC 7
15 NC
NC 8
14 NC
9 10 11 12 13
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002, 2004. All Rights Reserved
1
Spec Number 511017-883
FN3705.2