HA-2544883 Datasheet, PDF (1/5 Pages) Intersil Corporation – Video Operational Amplifier

HA-2544/883
July 1994
Video Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• Wide Unity Gain Bandwidth . . . . . . . . . . . 45MHz (Min)
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . 100V/µs (Min)
• Low Supply Current. . . . . . . . . . . . . . . . . . . 12mA (Max)
• Differential Gain Error . . . . . . . . . . . . . . . . 0.04dB (Max)
• Differential Phase Error. . . . . . . . . . . . . 0.11 Deg. (Max)
• Gain Flatness at 3.58MHz or 4.43MHz . . . 0.15dB (Max)
• Fast Settling Time (10V to 0.1%). . . . . . . . . 120ns (Typ)
Applications
• Video Systems
• Video Test Equipment
• Radar Displays
• Imaging Systems
• Pulse Amplifiers
• Signal Conditioning Circuits
• Data Acquisition Systems
The HA-2544/883 is a fast, unity gain stable, monolithic op amp
designed to meet the needs required for accurate reproduction
of video or high speed signals. It offers high voltage gain
(3.5kV/V min, 6kV/V typ), wide unity gain bandwidth of 45MHz
minimum and phase margin of 65 degrees (open loop). Built
from high quality Dielectric Isolation, the HA-2544/883 is
another addition to the Intersil series of high speed, wideband
op amps, and offers true video performance combined with the
versatility of an op amp.
The primary features of the HA-2544/883, include wide band-
width, 150V/µs (typ) slew rate, < 0.04dB differential gain error,
< 0.11 degrees differential phase error and gain flatness of
just 0.15dB at 3.58MHz and 4.43MHz, therefore proving to be
sufficient for video amplification. High performance and low
power requirements are met with a supply current of only
10mA typically and 12mA over the full temperature range.
Uses of the HA-2544/883 range from video test equipment
guidance systems, radar displays and other precise imaging
systems where stringent gain and phase requirements have
previously been met with costly hybrids and discrete circuitry.
The HA-2544/883 will also be used in non-video systems
requiring high speed signal conditioning such as data acquisi-
tion systems, medical electronics, specialized instrumentation
and communication systems.
Ordering Information
PART
NUMBER
HA2-2544/883
HA4-2544/883
HA7-2544/883
TEMPERATURE
RANGE
-55^oC to +125^oC
-55^oC to +125^oC
-55^oC to +125^oC
PACKAGE
8 Pin Can
20 Lead Ceramic LCC
8 Lead CerDIP
Pinouts
HA-2544/883
(CERDIP)
TOP VIEW
BAL 1
-IN 2
-
+IN 3
+
V- 4
8 NC
7 V+
6 OUT
5 BAL
HA-2544/883
(CLCC)
TOP VIEW
3 2 1 20 19
NC 4
18 NC
-IN ⁵
-
NC 6
+
+IN ⁷
17 _V+
16 NC
15 OUT
NC ⁸
14 _NC
9 10 11 12 13
HA-2544/883
(METAL CAN)
TOP VIEW
NC
8
BAL 1
7 V+
-
-IN 2
+
6 OUT
+IN 3
5 BAL
4
V-
CASE TIED TO V-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
3-161
File Number 511028-883
File Number 3699