HA-2539_03 Datasheet, PDF (1/10 Pages) Intersil Corporation – 600MHz, Very High Slew Rate Operational Amplifier

®
Data Sheet
May 2003
HA-2539
FN2896.5
600MHz, Very High Slew Rate
Operational Amplifier
The Intersil HA-2539 represents the ultimate in high slew
rate, wideband, monolithic operational amplifiers. It has
been designed and constructed with the Intersil High
Frequency Bipolar Dielectric Isolation process and features
dynamic parameters never before available from a truly
differential device.
With a 600V/µs slew rate and a 600MHz gain bandwidth
product, the HA-2539 is ideally suited for use in video and
RF amplifier designs, in closed loop gains of 10 or greater.
Full ±10V swing coupled with outstanding AC parameters
and complemented by high open loop gain makes the
devices useful in high speed data acquisition systems.
For further design assistance please refer to Application Note
AN541 (Using the HA-2539 Very High Slew Rate Wideband
Operational Amplifiers) and Application Note AN556 (Thermal
Safe-Operating-Areas For High Current Operational Amplifiers.
For military grade product information, the HA-2539/883 data
sheet is available upon request.
Part Number Information
PART NUMBER
HA3-2539-5
TEMP.
RANGE (^oC)
PACKAGE
0 to 75 14 Ld PDIP
PKG. NO.
E14.3
Features
• Very High Slew Rate . . . . . . . . . . . . . . . . . . . . . . 600V/µs
• Open Loop Gain. . . . . . . . . . . . . . . . . . . . . . . . . . . 15kV/V
• Wide Gain-Bandwidth (A_V ≥ 10). . . . . . . . . . . . . . 600MHz
• Power Bandwidth . . . . . . . . . . . . . . . . . . . . . . . . . 9.5MHz
• Low Offset Voltage. . . . . . . . . . . . . . . . . . . . . . . . . . . 8mV
• Input Voltage Noise . . . . . . . . . . . . . . . . . . . . . . 6nV/√Hz
• Output Voltage Swing . . . . . . . . . . . . . . . . . . . . . . . ±10V
• Monolithic Bipolar Dielectric Construction
Applications
• Pulse and Video Amplifiers
• Wideband Amplifiers
• High Speed Sample-Hold Circuits
• RF Oscillators
Pinout
HA-2539 (PDIP)
TOP VIEW
+IN 1
NC 2
+
V- 3
NC 4
NC 5
NC 6
NC 7
14 -IN
13 NC
12 NC
11 NC
10 +V
9 NC
8 OUTPUT
NOTE: No-Connection (NC) leads may be tied to a ground plane
for better isolation and heat dissipation.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.