HA-2529883 Datasheet, PDF (1/9 Pages) Intersil Corporation – Uncompensated, High Slew Rate High Output Current, Operational Amplifier

HA-2529/883
July 1997
Uncompensated, High Slew Rate
High Output Current, Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-883
and is Fully Conformant Under the Provisions of Para-
graph 1.2.1.
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . 135V/µs (Min)
150V/µs (Typ)
• High Output Current . . . . . . . . . . . . . . . . . ±30mA (Min)
• High Gain-Bandwidth Product . . . . . . . . . 15MHz (Min)
20MHz(Typ)
• Wide Power Bandwidth . . . . . . . . . . . . . . . 2.1MHz (Min)
• High Input Impedance . . . . . . . . . . . . . . . . . 50MΩ (Min)
130MΩ (Typ)
• Low Offset Current . . . . . . . . . . . . . . . . . . . 25nA (Max)
5nA (Typ)
• Fast Settling (10V Step to 0.1%) . . . . . . . . . . . 200ns (Typ)
• Low Quiescent Supply Current . . . . . . . . . . 6mA (Max)
Applications
• Data Acquisition Systems
• RF Amplifiers
• Video Amplifiers
• Signal Generators
• Pulse Amplification
The HA-2529/883 is a monolithic operational amplifier which
typifies excellence of design. With a design based on years
of experience coupled with the reliable dielectric isolation
process, these amplifiers provide an outstanding combina-
tion of DC and AC parameters at closed loop gains of 3 or
greater without external compensation.
The HA-2529/883 offers 135V/µs (min) slew rate and fast
settling time (200ns typ), while consuming a mere 6mA
(max) quiescent supply current, making these amplifiers
ideal components for video circuitry and data acquisition
designs. With 15MHz minimum gain-bandwidth product
combined with 7.5kV/V minimum open loop gain, the
HA-2529/883 is an ideal component for demanding signal
conditioning designs. These devices provide ±30mA (min)
output current drive with an output voltage swing of ±10V
(min), making then suited for pulse amplifier and RF ampli-
fier components. HA-2529/883 will upgrade a system pres-
ently using the HA-2520/22/883 or EHA-2520/22/883 in
regards to output current, slew rate, offset voltage drift, and
offset current drift. To insure compliance with slew rate and
transient response specifications, all devices are 100% tested
for AC performance characteristics over full temperature.
Ordering Information
TEMP.
PART NUMBER RANGE (^oC)
PACKAGE
HA2-2529/883
-55 to 125 8 Pin Metal Can
HA7-2529/883
-55 to 125 8 Ld CERDIP
PKG.
NO.
T8.C
F8.3A
Pinouts
HA-2529/883
(CERDIP)
TOP VIEW
BAL 1
-IN 2
-
+
+IN 3
V- 4
8 COMP
7 V+
6 OUT
5 BAL
HA-2529/883
(METAL CAN)
TOP VIEW
BAL 1
COMP
8
7 V+
-
-IN 2
+
6 OUT
+IN ³
5 BAL
4
V-
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Copyright © Intersil Corporation 1999
1
Spec Number 511025-883
File Number 3736.1