HA-2510883 Datasheet, PDF (1/7 Pages) Intersil Corporation – High Slew Rate Operational Amplifier

®
HA-2510/883
October 26, 2004
High Slew Rate Operational Amplifier
Features
Description
• This Circuit is Processed in Accordance to MIL-STD-
883 and is Fully Conformant Under the Provisions of
Paragraph 1.2.1.
• High Slew Rate . . . . . . . . . . . . . . . . . . . . . . .50V/µs (Min)
65V/µs (Typ)
• Wide Power Bandwidth . . . . . . . . . . . . . . . 750kHz (Min)
• Low Offset Current . . . . . . . . . . . . . . . . . . . . 25nA (Min)
10nA (Typ)
• High Input Impedance . . . . . . . . . . . . . . . . . 50MΩ (Min)
100MΩ (Typ)
• Wide Small Signal Bandwidth. . . . . . . . . . .12MHz (Typ)
• Fast Settling Time (0.1% of 10V Step) . . . . 250ns (Typ)
• Low Quiescent Supply Current . . . . . . . . . . 6mA (Max)
• Internally Compensated For Unity Gain Stability
The HA-2510/883 is a high performance operational ampli-
fier which sets the standards for maximum slew rate and
wide bandwidth operation in moderately powered, internally
compensated, monolithic devices. In addition to excellent
dynamic characteristics, this dielectrically isolated amplifier
also offers low offset current and high input impedance.
The ±50V/µs minimum slew rate and fast settling time of
the HA-2510/883 are ideally suited for high speed D/A, A/D,
and pulse amplification designs. The HA-2510/883’s supe-
rior bandwidth and 750kHz minimum full power bandwidth
are extremely useful in RF and video applications. To insure
compliance with slew rate and transient response specifica-
tions, all devices are 100% tested for AC performance char-
acteristics over full temperature limits. To improve signal
conditioning accuracy, the HA-2510/883 provides a maxi-
mum offset current of 25nA and a minimum input impedance
of 50MΩ, both at 25^oC, as well as offset voltage adjust capa-
bility.
Applications
Ordering Information
• Data Acquisition Systems
• RF Amplifiers
• Video Amplifiers
TEMP.
PART NUMBER RANGE (^oC)
PACKAGE
HA7-2510/883
-55 to 125 8 Ld CERDIP
PKG.
NO.
F8.3A
• Signal Generators
• Pulse Amplification
Pinout
HA-2510/883
(CERDIP)
TOP VIEW
BAL 1
-IN 2
-
+
+IN 3
V- 4
8 COMP
7 V+
6 OUT
5 BAL
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2002, 2004. All Rights Reserved
1
Spec Number 511003-883
FN3697.3