EL8300 Datasheet, PDF (1/14 Pages) Intersil Corporation – 200MHz Rail-to-Rail Amplifier

®
Data Sheet
May 20, 2005
EL8300
FN7347.2
200MHz Rail-to-Rail Amplifier
The EL8300 represents a triple rail-to-rail amplifier with a -
3dB bandwidth of 200MHz and slew rate of 200V/µs.
Running off a very low supply current of 2mA per channel,
the EL8300 also features inputs that go to 0.15V below the
V_S- rail.
The EL8300 includes a fast-acting disable/power-down
circuit. With a 25ns disable and a 200ns enable, the EL8300
is ideal for multiplexing applications.
The EL8300 is designed for a number of general purpose
video, communication, instrumentation, and industrial
applications. The EL8300 is available in an 16-pin SO and
16-pin QSOP packages and is specified for operation over
the -40°C to +85°C temperature range.
Pinout
EL8300
(16-PIN SO, QSOP)
TOP VIEW
INA+ 1
CEA 2
VS- 3
CEB 4
INB+ 5
NC 6
CEC 7
INC+ 8
16 INA-
-
+
15 OUTA
14 VS+
+
-
13 OUTB
12 INB-
11 NC
+
-
10 OUTC
9 INC-
Features
• 200MHz -3dB bandwidth
• 200V/µs slew rate
• Low supply current = 2mA per amplifier
• Supplies from 3V to 5.5V
• Rail-to-rail output
• Input to 0.15V below V_S-
• Fast 25ns disable
• Low cost
• Pb-Free pus Anneal available (RoHS compliant)
Applications
• Video amplifiers
• Portable/hand-held products
• Communications devices
Ordering Information
PART
NUMBER
PACKAGE TAPE & REEL PKG. DWG. #
EL8300IS
16-Pin SO
-
MDP0027
EL8300IS-T7
16-Pin SO
7”
MDP0027
EL8300IS-T13
16-Pin SO
13”
MDP0027
EL8300ISZ
16-Pin SO
-
MDP0027
(See Note)
(Pb-free)
EL8300ISZ-T7
16-Pin SO
7”
MDP0027
(See Note)
(Pb-free)
EL8300ISZ-T13 16-Pin SO
13”
MDP0027
(See Note)
(Pb-free)
EL8300IU
16-Pin QSOP
-
MDP0040
EL8300IU-T7
16-Pin QSOP
7”
MDP0040
EL8300IU-T13 16-Pin QSOP
13”
MDP0040
EL8300IUZ
16-Pin QSOP
-
(See Note)
(Pb-free)
MDP0040
EL8300IUZ-T7 16-Pin QSOP
7”
(See Note)
(Pb-free)
MDP0040
EL8300IUZ-T13 16-Pin QSOP
13”
(See Note)
(Pb-free)
MDP0040
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with both
SnPb and Pb-free soldering operations. Intersil Pb-free products are
MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.