|
EL7562 Datasheet, PDF (1/9 Pages) Intersil Corporation – Monolithic 2Amp DC-DC Step-Down Regulator | |||
|
NOT RECOM® MESNEDEEDDEatLFa7O5SR3h2NeeEtW DESIGNS
April 30, 2004
EL7562
FN7295
Monolithic 2Amp DC-DC Step-Down
Regulator
The EL7562 is an integrated,
synchronous step-down regulator with
output voltage adjustable from 1.0V to
3.8V. It is capable of delivering 2A continuous current at up
to 95% efficiency. The EL7562 operates at a constant
frequency pulse width modulation (PWM) mode, making
external synchronization possible. Patented on-chip
resistorless current sensing enables current mode control,
which provides cycle-by-cycle current limiting, over-current
protection, and excellent step load response. The EL7562 is
available in a fused-lead 16-pin QSOP package. With proper
external components, the whole converter fits into a less
than 0.5 in2 area. The minimal external components and
small size make this EL7562 ideal for desktop and portable
applications.
Features
⢠Integrated synchronous MOSFETs and current mode
controller
⢠2A continuous output current
⢠Up to 95% efficiency
⢠3.3V or 5V nominal input voltage
⢠Adjustable output from 1V to 3.8V
⢠Cycle-by-cycle current limit
⢠Precision reference
⢠±0.5% load and line regulation
⢠Adjustable switching frequency to 1MHz
⢠Oscillator synchronization possible
⢠Internal soft-start
The EL7562 is specified for operation over the 0°C to +70°C
temperature range.
⢠Over-temperature protection
⢠Under-voltage lockout
Pinout
⢠16-pin QSOP package
EL7562
(16-PIN QSOP)
TOP VIEW
Applications
⢠DSP, CPU core and IO supplies
⢠Logic/Bus supplies
C3
C4
0.1µF 270pF
R3
39â¦
C1
C2
100µF 0.1µF
VIN
(4.5V- 5.5V)
1 SGND PGND 16
2 COSC VREF 15
3 VDD
FB 14
4 PGND VDRV 13
5 PGND
LX 12
6 VIN
LX 11
7 VIN
VHI 10
8 EN
PGND 9
⢠Portable equipment
C5
0.1µF R2
R1 2.37kâ¦
1kâ¦
C6
0.1µF
VO
(3.3V,
C7 2A)
100µF
⢠DC-DC converter modules
⢠GTL + Bus power supply
Ordering Information
PART
NUMBER
EL7562CU
PACKAGE TAPE & REEL
16-Pin QSOP
-
PKG. DWG. #
MDP0040
EL7562CU-T7 16-Pin QSOP
7â
MDP0040
EL7562CU-T13 16-Pin QSOP
13â
MDP0040
Please refer to page 4 for 3.3V input Application Diagram
Manufactured under U.S. Patent No. 57,323,974
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.
|
▷ |