EL7242_05 Datasheet, PDF (1/6 Pages) Intersil Corporation – Dual Input, High Speed, Dual Channel Power MOSFET Driver

®
Data Sheet
EL7242, EL7252
November 14, 2005
FN7285.2
Dual Input, High Speed, Dual Channel
Power MOSFET Driver
The EL7242/EL7252 dual input, 2-channel drivers achieve
the same excellent switching performance of the EL7212
family while providing added flexibility. The 2-input logic and
configuration is applicable to numerous power MOSFET
drive circuits. As with other Elantec drivers, the
EL7242/EL7252 are excellent for driving large capacitive
loads with minimal delay and switching times. “Shoot-thru”
protection and latching circuits can be implemented by
simply “cross-coupling” the 2-channels.
Ordering Information
TAPE
PART
&
PART NUMBER MARKING REEL PACKAGE
PKG.
DWG. #
EL7242CN
EL7242CN
- 8-Pin PDIP MDP0031
EL7242CNZ
(See Note)
EL7242CS
EL7242CNZ
7242CS
- 8-Pin PDIP* MDP0031
(Pb-free)
- 8-Pin SOIC MDP0027
EL7242CS-T7 7242CS
7” 8-Pin SOIC MDP0027
EL7242CS-T13 7242CS
EL7242CSZ
(See Note)
7242CSZ
13” 8-Pin SOIC MDP0027
- 8-Pin SOIC MDP0027
(Pb-free)
EL7242CSZ-T7 7242CSZ
(See Note)
7” 8-Pin SOIC MDP0027
(Pb-free)
EL7242CSZ-T13 7242CSZ
(See Note)
EL7252CN
EL7252CN
13” 8-Pin SOIC MDP0027
(Pb-free)
- 8-Pin PDIP MDP0031
EL7252CS
7252CS
- 8-Pin SOIC MDP0027
EL7252CS-T7 7252CS
EL7252CS-T13 7252CS
7” 8-Pin SOIC MDP0027
13” 8-Pin SOIC MDP0027
EL7252CSZ
(See Note)
7252CSZ
EL7252CSZ-T7 7252CSZ
(See Note)
- 8-Pin SOIC MDP0027
(Pb-free)
7” 8-Pin SOIC MDP0027
(Pb-free)
EL7252CSZ-T13 7252CSZ
(See Note)
13” 8-Pin SOIC MDP0027
(Pb-free)
*Pb-free PDIPs can be used for through hole wave solder processing
only. They are not intended for use in Reflow solder processing
applications.
NOTE: Intersil Pb-free plus anneal products employ special Pb-free
material sets; molding compounds/die attach materials and 100% matte
tin plate termination finish, which are RoHS compliant and compatible
with both SnPb and Pb-free soldering operations. Intersil Pb-free
products are MSL classified at Pb-free peak reflow temperatures that
meet or exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• Logic AND/NAND input
• 3V and 5V Input compatible
• Clocking speeds up to 10MHz
• 20ns Switching/delay time
• 2A Peak drive
• Isolated drains
• Low output impedance
• Low quiescent current
• Wide operating voltage — 4.5V to 16V
• Pb-free plus anneal available (RoHS compliant)
Applications
• Short circuit protected switching
• Under-voltage shut-down circuits
• Switch-mode power supplies
• Motor controls
• Power MOSFET switching
• Switching capacitive loads
• Shoot-thru protection
• Latching drivers
Pinouts
EL7242
(8-PIN PDIP, SOIC)
TOP VIEW
EL7252
(8-PIN PDIP, SOIC)
TOP VIEW
Manufactured under U.S. Patent Nos. 5,334,883, #5,341,047
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.