EL7232 Datasheet, PDF (1/6 Pages) Intersil Corporation – Dual Channel, High Speed, High Current Line Driver w/3-State

®
Data Sheet
April 11, 2005
EL7232
FN7283.1
Dual Channel, High Speed, High Current
Line Driver w/3-State
The EL7232 3-state drivers are particularly well suited for
ATE and microprocessor based applications. The low
quiescent power dissipation makes this part attractive in
battery applications. The 2A peak drive capability, makes the
EL7232 an excellent choice when driving high speed
capacitive lines, as well. The input circuitry provides level
shifting from TTL levels to the supply rails. The EL7232 is
available in 8-pin PDIP and 8-lead SO packages.
Ordering Information
PART NUMBER PACKAGE
TAPE &
REEL PKG. DWG. #
EL7232CN
8-Pin PDIP
-
MDP0031
EL7232CS
8-Pin SO
-
MDP0027
EL7232CS-T7
8-Pin SO
7”
MDP0027
EL7232CS-T13
8-Pin SO
13”
MDP0027
EL7232CSZ
8-Pin SO
-
MDP0027
(See Note)
(Pb-free)
EL7232CSZ-T7
8-Pin SO
7”
MDP0027
(See Note)
(Pb-free)
EL7232CSZ-T13
(See Note)
8-Pin SO
(Pb-free)
13”
MDP0027
NOTE: Intersil Pb-free products employ special Pb-free material sets;
molding compounds/die attach materials and 100% matte tin plate
termination finish, which are RoHS compliant and compatible with
both SnPb and Pb-free soldering operations. Intersil Pb-free products
are MSL classified at Pb-free peak reflow temperatures that meet or
exceed the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• 3-State output
• 3V and 5V input compatible
• Clocking speeds up to 10MHz
• 20ns Switching/delay time
• 2A Peak drive
• Low, matched output impedance—5Ω
• Low quiescent current — 2.5mA
• Wide operating voltage — 4.5V-16V
• Pb-Free available (RoHS compliant)
Applications
• Parallel bus line drivers
• EPROM and PROM programming
• Motor controls
• Charge pumps
• Sampling circuits
• Pin drivers
• Bridge circuits
Pinout
EL7232
(8-PIN PDIP, SO)
TOP VIEW
Manufactured under U.S. Patent Nos. 5,334,883, #5,341,047
Truth Table
3-STATE
1
1
0
0
INPUT
0
1
0
1
OUTPUT
1
0
Open
Open
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-352-6832 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright Intersil Americas Inc. 2003, 2005. All Rights Reserved
All other trademarks mentioned are the property of their respective owners.