EL6296 Datasheet, PDF (1/2 Pages) Intersil Corporation – Laser Diode Driver with Waveform Generator

®
Data Sheet
August 18, 2004
EL6296
FN7273.1
Laser Diode Driver with Waveform
Generator
The EL6296 is a highly integrated
laser diode driver designed to support
multi-standard writable optical drives.
It accomplishes this by incorporating a waveform generator
wherein the diode currents and timing details can be
programmed before operation. The data input circuitry
inspects the NRZ serial data waveform and generates
programmed waveforms in recognition of 3, 4, 5, or 6 or
more clock periods of space changing to 3, 4, 5, or 6 or more
clock periods of mark, and vice versa.
This programmable architecture allows reprogramming of
the timers to support different media, DVD or CD standards,
and different speeds. The programming is accomplished
through a serial interface port. Two outputs are provided to
support dual-laser multi-standard optical heads.
The EL6296 requires 3.3V and 5V supplies, with all the
logical interface operating on the 3.3V supply.
Ordering Information
PART NUMBER PACKAGE TAPE & REEL
PKG.
DWG. #
EL6296CL
24-Pin QFN
-
MDP0046
EL6296CL-T7
24-Pin QFN
7”
MDP0046
EL6296CL-T13 24-Pin QFN
13”
MDP0046
EL6296CLZ
24-Pin QFN
-
MDP0046
(See Note)
(Pb-free)
EL6296CLZ-T7 24-Pin QFN
7”
(See Note)
(Pb-free)
MDP0046
EL6296CLZ-T13 24-Pin QFN
13”
MDP0046
(See Note)
(Pb-free)
NOTE: Intersil Pb-free products employ special Pb-free material
sets; molding compounds/die attach materials and 100% matte tin
plate termination finish, which is compatible with both SnPb and
Pb-free soldering operations. Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J Std-020B.
Get FULL DATASHEET
Features
• Pb-free available
• Complete programmable laser diode driver
• 350mA maximum total output
• 8-bit x 8-bit multiplying DAC output provides 8-bit full scale
adjustment and 8-bit resolution at any full scale output
• 0.17ns timer resolution
• Two laser outputs allows read/write DVD and CD
combinations
• Programmable waveform values support 2.6GB DVD-
RAM, 4.7GB DVD-RAM, DVD-R, DVD+RW, DVD-RW,
CD-RW, and CD-R
• Analog input supports APC
• HFM oscillator programmable to 100mA_P-P from 100MHz
to 500MHz
• PLL allows reduced-frequency clock on flex cable
• Separate serial input works up to 25Mb/sec
Applications
• Combination DVD writable and CD writable drives
• DVD camcorders
• DVD video recorders
Pinout
EL6296
(24-PIN QFN)
TOP VIEW
RWB 1
CLK 2
NRZ 3
VSL 4
GND 5
VSL 6
VSA 7
THERMAL
PAD
19 VSO
18 OUT1
17 GND
16 VSO
15 OUT2
14 VSO
13 L/G
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 321-724-7143 | Intersil (and design) is a registered trademark of Intersil Americas Inc.
Copyright © Intersil Americas Inc. 2003, 2004. All Rights Reserved. Elantec is a registered trademark of Elantec Semiconductor, Inc.
All other trademarks mentioned are the property of their respective owners.