EL5420T_15 Datasheet, PDF (1/17 Pages) Intersil Corporation – 12MHz Rail-to-Rail Input-Output Operational Amplifier

Data Sheet
September 8, 2015
EL5420T
FN6838.1
12MHz Rail-to-Rail Input-Output
Operational Amplifier
The EL5420T is a low power, high voltage rail-to-rail
input-output amplifier. The EL5420T contains four amplifiers.
Each amplifier exhibits beyond the rail input capability,
rail-to-rail output capability and is unity gain stable.
The maximum operating voltage range is from 4.5V to 19V. It
can be configured for single or dual supply operation, and
typically consumes only 500µA per amplifier. The EL5420T
has an output short circuit capability of ±200mA and a
continuous output current capability of ±70mA.
The EL5420T features a slew rate of 12V/µs. Also, the
device provides common mode input capability beyond the
supply rails, rail-to-rail output capability, and a bandwidth of
12MHz (-3dB). This enables the amplifiers to offer maximum
dynamic range at any supply voltage. These features make
the EL5420T an ideal amplifier solution for use in TFT-LCD
panels as a V_COM or static gamma buffer, and in high speed
filtering and signal conditioning applications. Other
applications include battery power and portable devices,
especially where low power consumption is important.
The EL5420T is available in a 14 Ld TSSOP package,
14 Ld SOIC package, and a space saving thermally
enhanced 16 Ld QFN package. All feature a standard
operational amplifier pin out. The devices operate over an
ambient temperature range of -40°C to +85°C.
Ordering Information
PART NUMBER
(Note)
PART PACKAGE PKG.
MARKING (Pb-Free) DWG. #
EL5420TILZ* (No longer 5420TIL Z 16 Ld QFN
available or supported)
MDP0046
EL5420TIRZ*
5420TIR Z 14 Ld TSSOP MDP0044
EL5420TISZ*(No longer 5420TIS Z 14 Ld SOIC MDP0027
available or supported)
*Add “-T7” or “-T13” suffix for tape and reel.Please refer to TB347
for details on reel specifications
NOTE: These Intersil Pb-free plastic packaged products employ
special Pb-free material sets, molding compounds/die attach
materials, and 100% matte tin plate plus anneal (e3 termination
finish, which is RoHS compliant and compatible with both SnPb and
Pb-free soldering operations). Intersil Pb-free products are MSL
classified at Pb-free peak reflow temperatures that meet or exceed
the Pb-free requirements of IPC/JEDEC J STD-020.
Features
• 12MHz (-3dB) Bandwidth
• 4.5V to 19V Maximum Supply Voltage Range
• 12V/µs Slew Rate
• 500µA Supply Current (per Amplifier)
• ±70mA Continuous Output Current
• ±200mA Output Short Circuit Current
• Unity-gain Stable
• Beyond the Rails Input Capability
• Rail-to-rail Output Swing
• Built-in Thermal Protection
• -40°C to +85°C Ambient Temperature Range
• Pb-free (RoHS compliant)
Applications
• TFT-LCD Panels
• V_COM Amplifiers
• Static Gamma Buffers
• Electronics Notebooks
• Electronics Games
• Touch-screen Displays
• Personal Communication Devices
• Personal Digital Assistants (PDA)
• Portable Instrumentation
• Sampling ADC Amplifiers
• Wireless LANs
• Office Automation
• Active Filters
• ADC/DAC Buffer
1
CAUTION: These devices are sensitive to electrostatic discharge; follow proper IC Handling Procedures.
1-888-INTERSIL or 1-888-468-3774 | Copyright Intersil Americas LLC 2009, 2015. All Rights Reserved
Intersil (and design) is a trademark owned by Intersil Corporation or one of its subsidiaries.
All other trademarks mentioned are the property of their respective owners.